Ontario Agriculture

The network for agriculture in Ontario, Canada

Implement steering keeps pulled implements on the right track

                       

It's all very well setting up virtual guidelines for a tractor's visual guidance or automatic steering system to follow, but what if the implement being used doesn't run true?

After all, a large part of the justification for GPS autosteer is its ability to maximise implement output by minimising overlaps and allowing accurate work to continue at night. With ultra-accurate 1 INCH (±2cm) RTK system accuracy measured in the INCH/low centimetres, equipment that runs off-centre creates a headache.

"Once you've got a highly accurate RTK guidance system on the tractor, you come to realise how poorly a lot of implements follow, even on flat ground," says Paul Smith, Precision Expert at Northern Equipment Solutions.

Speaking at a precision farming workshop that helped growers adopt a "controlled traffic" approach to field operations, Mr Smith cited difficulties keeping equipment on track when preparing land for cash crops and potatoes.

With the latter, auto-steering achieves tight bed spacing but if things go out of true the tractor's front wheels can end up running over a row trying to compensate.

It is suggested to adopt GPS Steering to solve these issues and identify two common causes of implement misalignment.

For most growers, this problem relates to gravity pulling an implement downhill as it works across a slope.  This can be corrected using 'passive' implement steering, where you have a receiver on the implement to help control the tractor's steering, or by attaching a Protrakker system that steers the implement at the hitching point to the tractor, when the implement does not have the option of “active” implement steering, implements that come equipped with steering can be steered actively.

Among the systems commercially available are Trimble's TrueGuide and the John Deere iGuide system, both of which provide "passive" steering correction to keep heavy cultivation and seeding implements on track as they traverse hills and hollows.  Systems commercially available for active systems are Trimble’s TrueTracker and The John Deere iSteer Systems, both of which control the implements steering system to place the implement in the correct position at all times.  Implements looking for the increased accuracy of active style steering can provide steering by directing the tongue of the implement to correct the position.

GPS-steered or Giro Operated ProTRAKKER by MBR

In passive guided systems, these add-ons use the existing terminal of the tractor's auto-steering system with a receiver mounted on the implement. Extra software calculates the steering inputs needed to offset the tractor uphill so that the implement follows the correct path to neatly butt up to the previous pass, with the overlap pre-set by the operator and no gaps.  Whereas active systems steer the implement independently of the tractor, much like having 2 independent GPS systems.

It's a step beyond the implement compensation feature that most auto-steering systems now have and which take into account the way a trailed implement cuts corners. They work by calculating the implement's path from the position of the drawbar pivot and working elements - such as the coulters on a drill - relative to the receiver to cause the tractor to steer a little wider through a curve than it would otherwise.

With TrueGuide and iGuide, the receiver on the implement provides the main guide reference, with RTK signal correction giving ±1”/±2cm accuracy. The tractor then compensates for implement crabbing on slopes, as well as accurately compensating through curves based on the actual path of the implement.

Suppliers say the technology brings to undulating and hilly ground all the benefits of accurate bout matching and tramline positioning that are easily achieved on level fields.

However, the 'passive' steering approach may not be enough for a wide implement that tends to pull to one side or the other inconsistently. The level of consistent accuracy will not be enough in situations where you want the implement to consistently follow a very precise path.

This level of implement control accuracy has other potential uses. Such as strip tilling and placement of slurry and/or fertiliser along crop rows before they are sown - an approach that lends itself to a controlled traffic situation using the same wheel paths year after year.

WHAT EQUIPMENT IS OUT THERE?

Trimble

Trimble says its AgGPS TrueTracker package is designed to handle a number of different implement steering solutions, including on-the-move hydraulic drawbar adjustment, steerable implement support wheels and rudder discs, as well as side-shift and yaw adjustment on mounted equipment.  Trimble’s Trueguide package is designed to use calculations from a implement mounted controller to guide the tractor to correct the path of the implement.

As well as the implement-mounted antenna, the system includes the NavController II controller with terrain correction to compensate for the antenna's offset position caused when the implement is working across a significant incline.

John Deere

John Deere says its Starfire GPS iSteer  package is designed to handle a number of different implement steering solutions as well, including on-the-move hydraulic drawbar adjustment, steerable implement support wheels and rudder type discs, as well as side-shift and yaw adjustment on mounted equipment.  John Deere’s iGuide package is designed to use calculations from a implement mounted controller to guide the tractor to correct the path of the implement.

As well as the implement-mounted antenna, the system includes the iSteer controller to compensate for the antenna's offset position caused when the implement is working across a significant incline.

Protrakker

MBR maker of the Protrakker says its tongue guidance package is designed to control non-controllable implement types including pull type sprayers, tillage and cultivators, any type of planting equipment and veggie harvester .  MBR’s Protrakker can be controlled with MBR Giro based controller, or with either Trimble’s TrueTracker or John Deere’s iSteer.

------------------------------------------------------------------------------------------------------------------------------------------

Paul Smith is the owner of Northern Equipment Solutions and based in Central Ontario, Canada. Providing Quality Potato Equipment, Precision Agriculture and Other Advanced Equipment, Northern Equipment Solutions ensures that your profits and yields are maximized. www.northernequipment.ca or sales@northernequipment.ca

Views: 821

Comment

You need to be a member of Ontario Agriculture to add comments!

Join Ontario Agriculture

Agriculture Headlines from Farms.com Canada East News - click on title for full story

Leif Carlson Named Vice President, Markets and Trade 

Cereals Canada is pleased to announce the appointment of Leif Carlson to the position of Vice President, Markets and Trade, effective immediately. In this role, Carlson will lead efforts to expand and protect global market opportunities for Canada’s cereal crops. “Leif’s expertise, commitment to agriculture, and proven leadership continue to strengthen the Canadian cereals value chain,” said Dean Dias, Chief Executive Officer of Cereals Canada. “His leadership in this role will support dependable market access and sustained global demand for Canadian wheat, durum, barley, and oats.” In his previous role as Director of Market Intelligence and Trade Policy, Carlson championed the promotion of Canadian cereals and helped protect the interests of the value chain in global markets. Since September 2025, he has also represented the sector as a Director with the Canadian Agri-Food Trade Alliance (CAFTA), advocating for fair and predictable trade. Carlson holds a Bachelor of Commerce and a

Canada’s Ag Day: Celebrating Farmers Who Grow Their Best for the World

Every year, Canadian farmers combine expertise and innovation to grow their best for the world. Their commitment ensures that Canada continues to deliver wheat that meets the needs of millers, bakers, and consumers here at home and in over eighty countries around the globe. As we celebrate Canada’s Ag Day, we’re proud to recognize the dedication of the people whose work feeds families, supports our economy, strengthens rural communities, and helps sustain Canada’s reputation as a trusted supplier of high-quality wheat. Highly valued for its high protein content, milling performance, and ability to produce great tasting foods—from breads and noodles to pastries and breakfast cereals—Canadian wheat is a top choice for millers and food manufacturers in more than 80 countries. Find out what makes Canadian wheat amongst the best in the world at Canadian Wheat—Quality You Can See and Taste

Grain sector warns of information gaps in AAFC research reductions, calls for immediate program impact disclosure

Grain Growers of Canada is calling on the federal government to provide clarity on the impacts of recent staffing reductions and announced closures or consolidations of Agriculture and Agri-Food Canada research facilities, stating that downstream consequences cannot be assessed without clear, program-level information. “Transparency is essential when decisions affect the foundation of Canada’s agricultural research system,” said Scott Hepworth, chair of Grain Growers of Canada and Saskatchewan grain farmer. “Without clear disclosure of what research capacity is being reduced or eliminated, the sector cannot understand the long-term risks to production and competitiveness,” he added. “It must be clear what capacity is being lost, where, and with what consequences.” Agriculture and Agri-Food Canada has cited personnel confidentiality in limiting details on the announced changes. Grain Growers of Canada emphasized that while personnel confidentiality must be respected, it does not,

New Leadership Team Named at OFVGA

Ontario’s fruit and vegetable association appoints a new chair and vice chair to lead advocacy, manage challenges, and support growers across the horticulture industry.

CRSB Launches Certified Beef Producer Incentive Program

CRSB launches a new incentive program offering 400 dollars to certified beef producers in 2026 to reward sustainable practices and strengthen Canada’s responsible beef supply chain.

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service