Ontario Agriculture

The network for agriculture in Ontario, Canada

Mark your calendars for the 2017 6th Annual US Corn Belt Crop Tour!

U.S. Corn Belt Crop Tour is back!

Join us from June 24th – July 10th, 2017, as we go through 12 U.S. states  with “Marketing Man” Moe Agostino, to provide farmers with an indication of where grain prices may be headed and provide a selling advantage:- http://riskmanagement.farms.com/events/us-cornbelt-tour-2017

Thank you all Sponsors

Views: 5672

Reply to This

Replies to This Discussion

Day 11 Jul 4, 17 S Hwy 15 & 330 St. N Lafayette, MN soys in 2016 (1st 2 photos) vs. 2016 (3rd photo)

Day 11 July 4, 17 S Hwy 14 & Lafayette & N of Courtland. MN corn 2017 vs. 2016

Day 11 Jul 4, 17 Anything South of Mankato & Garden City, MN looking better on July 4

Day 11 Jul 4, 17 in Southern MN best corn so far "Garden Spot" planted April 18, 108 day corn, 240 - 250 potential, 20 inch rows

Day 11 July 4, 17 Thank You to Brad Ftevermer for his valuable time on a holiday no less!

"Farmer Tip of the Day" from Brad Ftevermer use gypsum at planting to control crusting & compaction

Bonus 2nd "Farmer tip of the day" from Brad Ftevermer apply fungicide early V10 for 10 bpa increase & at tassel

Day 11 July 4, 17 East Hwy 13 near Windom, MN Red Light District wind turbines from head high back to waist high corn

Day 11 July 4, 17 Hwy 60 SW near  this area seems to be getting a lot moisture with lots of pot holes everywhere

Day 11 MN this was the best state out of 10 states thus far rating a 7 out of 10 not as good as last year

Day 12 July 5, 17 in the state of Iowa. UDSA rates corn 79% G-E, 4% P-VP & soys 74% G-E, 5% P-VP Thank you all sponsors

Day 12 Jul 5, 17 E 180th & 182 St near Alvord, IA better crops, soys higher knee high & corn chest to head high more uniformity

Day 12 Jul 5, 17 Hwy 34 E near Corning, IA corn hit with hail days away from tasseling

Day 12 Jul 5, 17 S Hwy 71 & 44 near Audorbon, IA USDA reported corn crop conditions up +1% to 68 G-E

Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

I’m switching my wheat variety; do I need to change my seeding rate?

The short answer is yes; you will most likely need to change your seeding rate, but this is not just because you are planting a different wheat variety. Rather, seeding rates should be adjusted annually to reflect seed source characteristics (germination, thousand kernel weight [TKW]) and the environment the seed is being planted into, to ensure you can achieve your target plant population.   Let’s dig into why this is. For spring wheat, provincial target plant population recommendations are between 23-28 pl/ft2, with many producers targeting the upper end of this recommendation. Achieving your target plant stands sets your crops up for success, as crop uniformity is improved, weed pressure is combatted and resources are optimized.  Seeding rates should be calculated to achieve your target plant stand, which means accounting for germination percentage, expected mortality and, importantly, your TKW. TKW changes year-to-year and from variety to variety. Let’s consider an example to ill

How much 10-34-0 can be applied with my corn seed?

Oddly, I have had this conversation more this winter/spring than ever before. On paper, there is a finite answer. Anecdotally, there are a few different options and it is all dependent on soil type and soil conditions, moisture, etc. First of all, side-banding any type of fertilizer is much safer than placing it with the seed. Some fertilizers are safe in certain quantities with the seed, but very few. Side-banding is much safer and provides quick access to the roots. Midrow banding is the safest method, but roots take that much longer to access the fertilizer row, which negates the “starter” effect. The other factor that indicates the level of safety is soil moisture; the drier the soil, the more risky it is to place any fertilizer with or near the seed. I’m guilty of thinking that fertilizer toxicity to the seed is mainly due to the nitrogen content and a result of ammonia burn. Salt injury is actually more common and affects germination and early season growth, so applying fertili

AGT Food and Ingredients Inc. Announces Date for Q1 2026 Results and Conference Call

AGT Food and Ingredients Inc. (TSX: AGTF) ("AGT" or the "Company") announces the release of its Q1 2026 results on May 12, 2026 after market close and has scheduled a conference call at 8:30 a.m. Eastern time on May 13, 2026. To join the conference, please dial 1-833-821-0163 (toll free from Canada & the U.S.) or +1-647-846-7232 (from outside Canada & the U.S.). An audio replay of the conference call will be available on AGT's website after the call by visiting www.agtfoods.com. The financial statements and notes thereto for the three months ended March 31, 2026, as well as the related management's discussion and analysis will be filed on SEDAR+ at www.sedarplus.com and will also be available on the AGT website at www.agtfoods.com prior to the conference call. About AGT AGT is a globally diversified food company that produces high-quality, nutritious products for everyday consumption. Our products reach consumers in 127 countries, and our global footprint consists of 39 state-of-the

Rising Waters on the Canadian Prairies and Beyond

With flooding affecting several Canadian provinces, farmers are being urged to act quickly to protect crops, animals, infrastructure, and long-term soil health.

Is Your Bull Ready? A Year-Round Approach to Bull Management

Every cow-calf producer has either lived it or knows someone who has. Breeding season wraps up and everything looks fine, until fall preg-checks tell a different story: open cows, late calvers and a breeding window that slipped wider than planned. While cow nutrition, body condition and management are frequently evaluated, one critical factor is often underestimated—the bull. Most frustrating is that there are often no obvious warning signs during breeding. The bull was turned out, was covering cows and looked the part. On the surface, everything appeared normal. That’s exactly why a bull breeding soundness evaluation (BBSE) matters more than many producers realize. It is one of the few opportunities to take some guesswork out of bull performance. On a cow-calf operation, bulls get a lot of attention for a couple of months out of the year and very little once breeding season wraps up. The reality is that a bull’s value doesn’t start on turnout day, and it definitely doesn’t end when

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service