Has anyone started harvesting your wheat yet? Post your yields and quality here.

We are likely a week away from getting started.

Walked through the wheat yesterday, it looked pretty good.

I hear some guys are worrying about sprouting.

Good luck.

▶ Reply to This

Replies to This Discussion

Permalink Reply by OntAG Admin on July 16, 2013 at 2:37am

On Twitter:

TerryDaynard7:09am via TweetCaster for Android

Thks to @grandridgefarms, wheat off yesterday w of Guelph. 15%, 0.5% fusarium, grade ok. Yield not yet cert. but appears above ave. #ontag

DeltaPowerEquip8:08am via web

The #Wheat harvest rolls on, reporting as low as 13.9% by Dashwood. #ontag

lolamayfarmsJul 15, 4:19pm via Twitter for iPhone

1st load of wheat came in just now. 15.4% moisture. .5% Fusarium .1% sprouts and 62lbs/bu #ontag #wheat

Andrew_J11Jul 15, 2:38pm via Twitter for iPhone

Wheat coming off west of strathroy, 15.8% moisture yesterday and 13.7% today. Fusarium an issue for sure 2-2.5% damage #ontag

ekennes EkennesJul 15, 1:30pm via Twitter for Android

Wheat coming off near Parkhill currently testing 14.5. Is dry 14 or 13? #wheat #ontag@WheatPete pic.twitter.com/vIildxQIjr

▶ Reply

Permalink Reply by OntAG Admin on July 16, 2013 at 3:52am

Received our 1st load of SWW this am. Seeing lots of sprouts (5%) and fusarium (>1%). #OntAg, its going to be a tough #harvest13.

▶ Reply

Permalink Reply by Joe Dales on July 18, 2013 at 1:29am

Some photos pulled together by Amanda Brodhagen.

Find more photos like this on Ontario Agriculture

▶ Reply

Permalink Reply by Tom Cox on August 1, 2013 at 3:26am

Struggling to get the last 10% off here. Yields have been okay, test weights generally a bit light. Fusarium has been acceptable on everything that's been sprayed and probably 80-90 percent of the unsprayed has been downgraded....just don't get why guys refuse to look after their crops.