Ontario Agriculture

The network for agriculture in Ontario, Canada

Regulatory Burdens on Slaughter Facilities.

A story on the front page of the Regional Country News today about puts it over the top with regard to burdensome regs. on slaughter and meat processing plants. The ridiculous standards imposed on this highly important segment of the farm business infrastructure are beyond bizarre.

When these small facilities are gone, they usually do not come back. Without them, small enterprises like mine might as well shut the door because in the recent years our only positive cash flow comes from our direct-to-consumer marketing side, small as it is.

After reading the story, I am working on forming a small group of like-minded people who would be able to carry an "impactful" and articulate message to the people in charge of the inspection bureaucracy.

This group would ideally include beef/pork producers who understand the value and importance of the local butcher shop, some from the "buy local" movement, etc. Small enough to be agile and fast, and big enough to offer full representation.

Do you have any suggestions?


Views: 1450

▶ Reply to This

Replies to This Discussion

Permalink Reply by littlelamb on May 7, 2010 at 1:07am
Laurie,

It was really well written, but Gary Schellenberger lives not more then 1/4 of a mile from me and has never even tried to support us buy buying even one dozen of eggs. He doesn't even canvas us during election, being so close, so I guess why would I expect him to support small farmers.
Permalink Reply by Laurie Knechtel on May 7, 2010 at 1:48am
Which is exactly why this message was written. I couldn't get the image of photo opp's between Ritz, Schellenberger and other parties involved, smiling, holding a cheque and claiming that the $4.5M is going to benefit family farms when, as your message clearly demonstrates, they don't get it - not even close.

A couple updates since I sent the email:
1. I was advised to also copy Perth-Wellington MPP John Wilkinson on email which I did same day as original was sent.
2. Was contacted that same evening by Jim Gracie, VP of Quality Meats indicating that he would like to speak further about this. My response:

Hi Jim.

Thank you for your email in response to my message from earlier today.
I would very much like to chat with you about this funding and the direction in which Great Lakes Specialty Meats in going in the not-so-distant future.

I just came across the following tidbit online:

Mitchell Plant Expansion To Use Ontario Hogs
Tuesday, May 4, 2010 8:21 am
It could take up to two years to finalize the upgrades to the Great Lakes Specialty Meats plant in Mitchell.
But when the upgrades are done a company spokesman says the product coming out of that plant will be a lot different than what's coming out of it now.
Jim Gracie says the plant will change from a basic slaughtering operation to one that's capable of producing higher value-added pork products for domestic and international markets.
And Gracie says they'll be doing that with Ontario hogs.

Quality Meats bought the Mitchell plant late last year.
Gracie says they're hoping to start on the upgrades this summer and have them all finished by March of 2012.

Source: http://www.am920.ca/news.php?mode=day&day=04&mth=05&yr=...

Would love to discuss this and what it means for Ontario farmers and the local option (as it pertains to meat) overall.
I have some time Monday morning. Tues/Wed are pretty booked. Please advise what works for you and we'll proceed accordingly.

Thank you and have a lovely evening.


We are going to be chatting via phone on Monday. Will follow up with you after that.
Permalink Reply by littlelamb on May 14, 2010 at 2:53am
Hey Laurie,

How did the chat go with Jim Gracie @ Quality Foods.
Permalink Reply by Joe Dales on May 26, 2010 at 8:01am
More News on the Ontario Pork Processing Front.

Maple Leaf launches sale process for Burlington, Ontario, pork processing business


TORONTO, May 25, 2010 /PRNewswire via COMTEX/ --Maple Leaf Foods (MFI: TSX) today announced that it is launching a formal sale process for its Ontario pork processing business located in Burlington, Ontario, following renewed interest from potential purchasers and improved economic conditions and credit markets. The Company has engaged financial advisors to support the sale process.

"The sale of the Burlington business will complete the last phase of Maple Leaf's protein transformation journey and supports our commitment to refocus our growth in the value-added meat, meals and bakery business," said Michael Vels, Chief Financial Officer. "We are reinvigorating the sale process following renewed interest, including the potential of completing a sale to a producer group."

The 365,000 square foot Burlington facility is one of the largest and most efficient pork processing facilities in Canada. Together with its management and sales teams it is a profitable business with a highly skilled workforce.

Maple Leaf Foods Inc. is a leading Canadian food processing company headquartered in Toronto, Canada. The Company employs approximately 23,500 people at its operations across Canada and in the United States, Europe and Asia. The Company had sales of $5.2 billion in 2009.

SOURCE Maple Leaf Foods Inc.

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

I’m switching my wheat variety; do I need to change my seeding rate?

The short answer is yes; you will most likely need to change your seeding rate, but this is not just because you are planting a different wheat variety. Rather, seeding rates should be adjusted annually to reflect seed source characteristics (germination, thousand kernel weight [TKW]) and the environment the seed is being planted into, to ensure you can achieve your target plant population.   Let’s dig into why this is. For spring wheat, provincial target plant population recommendations are between 23-28 pl/ft2, with many producers targeting the upper end of this recommendation. Achieving your target plant stands sets your crops up for success, as crop uniformity is improved, weed pressure is combatted and resources are optimized.  Seeding rates should be calculated to achieve your target plant stand, which means accounting for germination percentage, expected mortality and, importantly, your TKW. TKW changes year-to-year and from variety to variety. Let’s consider an example to ill

How much 10-34-0 can be applied with my corn seed?

Oddly, I have had this conversation more this winter/spring than ever before. On paper, there is a finite answer. Anecdotally, there are a few different options and it is all dependent on soil type and soil conditions, moisture, etc. First of all, side-banding any type of fertilizer is much safer than placing it with the seed. Some fertilizers are safe in certain quantities with the seed, but very few. Side-banding is much safer and provides quick access to the roots. Midrow banding is the safest method, but roots take that much longer to access the fertilizer row, which negates the “starter” effect. The other factor that indicates the level of safety is soil moisture; the drier the soil, the more risky it is to place any fertilizer with or near the seed. I’m guilty of thinking that fertilizer toxicity to the seed is mainly due to the nitrogen content and a result of ammonia burn. Salt injury is actually more common and affects germination and early season growth, so applying fertili

AGT Food and Ingredients Inc. Announces Date for Q1 2026 Results and Conference Call

AGT Food and Ingredients Inc. (TSX: AGTF) ("AGT" or the "Company") announces the release of its Q1 2026 results on May 12, 2026 after market close and has scheduled a conference call at 8:30 a.m. Eastern time on May 13, 2026. To join the conference, please dial 1-833-821-0163 (toll free from Canada & the U.S.) or +1-647-846-7232 (from outside Canada & the U.S.). An audio replay of the conference call will be available on AGT's website after the call by visiting www.agtfoods.com. The financial statements and notes thereto for the three months ended March 31, 2026, as well as the related management's discussion and analysis will be filed on SEDAR+ at www.sedarplus.com and will also be available on the AGT website at www.agtfoods.com prior to the conference call. About AGT AGT is a globally diversified food company that produces high-quality, nutritious products for everyday consumption. Our products reach consumers in 127 countries, and our global footprint consists of 39 state-of-the

Rising Waters on the Canadian Prairies and Beyond

With flooding affecting several Canadian provinces, farmers are being urged to act quickly to protect crops, animals, infrastructure, and long-term soil health.

Is Your Bull Ready? A Year-Round Approach to Bull Management

Every cow-calf producer has either lived it or knows someone who has. Breeding season wraps up and everything looks fine, until fall preg-checks tell a different story: open cows, late calvers and a breeding window that slipped wider than planned. While cow nutrition, body condition and management are frequently evaluated, one critical factor is often underestimated—the bull. Most frustrating is that there are often no obvious warning signs during breeding. The bull was turned out, was covering cows and looked the part. On the surface, everything appeared normal. That’s exactly why a bull breeding soundness evaluation (BBSE) matters more than many producers realize. It is one of the few opportunities to take some guesswork out of bull performance. On a cow-calf operation, bulls get a lot of attention for a couple of months out of the year and very little once breeding season wraps up. The reality is that a bull’s value doesn’t start on turnout day, and it definitely doesn’t end when

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service