Ontario Agriculture

The network for agriculture in Ontario, Canada

Where should I start??

Hi all,

I recently acquired a small farm in Southern Ontario, and was wondering what my best options are.

I have approx. 15 workable acres, which has grown ginseng in the past. I also have a 2 floor, 10,000 square foot barn, that is approx. 20 years old, and in great shape. It was used to grow poultry.

Should I rent the land out? Or should I hire somebody to plant corn? Or other ideas?

Also what should I do with the barn? I'd like to do something in there, just hoping for ideas.

Thanks.

Views: 694

▶ Reply to This

Replies to This Discussion

Permalink Reply by OntAG Admin on January 24, 2012 at 1:50am
Permalink Reply by Tom Cox on January 27, 2012 at 3:31am

Congratulations on the new purchase.  Assuming that your land is reasonably productive you shouldn't have too much trouble finding someone interested in renting from you.  15 acres is a fairly small parcel but providing there is adequate access to the field from an adjoining road there will be quite a few takers. There are great variations in the prices being offered for rental land and often a sizable gap between what numbers get tossed around in the coffee shops and what is actually getting paid.  You could go to an established agri business -farm equipment dealer, fertilizer dealer and ask for a recommendation of who is reputable and does a good job.  A sign on the field would likely be enough to get you some offers but no assurance of the calibre of renter.  I'd want at least some cash upfront if I was renting it out.

If you decide to have it planted yourself you're likely looking at $500 in costs per acre vs. renting it out where you'll get $1-200 in income.  There is more upside to doing it yourself but you really need to find the right custom operator if that's where you head.

 

No clue on uses for an old chicken barn....do your kids like ball hockey ?  Stay away from pidgeons...

 

Good luck.

Permalink Reply by Teresa Ainslie on February 2, 2012 at 4:08am



T. Ainslie said:

I'm assuming you have an empty barn and all the chicken equipment except the fans and air inlet controllers has been removed. Otherwise you should get quota and raise broiler chickens :)

We have an old (empty) chicken barn too and removed part of the second floor to create a "cathedral ceiling" in one half and a storage loft in the other. Put a good set of stairs and railing up to the loft as opposed to a ladder so storage access is easier and safer. We have mainly hay and straw storage (small square bales) in the loft but also store lumber and household "overflow" up there because it is much dryer than our basement and cleaner than our driveshed. The high ceiling allows us to use the loader tractor to get heavy stuff in & out of the loft. A high ceiling also would make a suitable area for horses.

Taking down part of the ceiling got rid of a maze of support posts so now larger vehicles and equipment can move around easily. The 2nd floor had a 2 1/2 inch layer of concrete which was broken up and used to build a ramp ("barn bank" lol) in front of one of the barn's big doors and created a drive-through barn. If I were to make additional changes I would widen and raise the door at the high-ceilinged end of the barn to allow entry with a full haywagon. We are gradually exchanging many of the fans for windows so we don't have to use so many lights.

Check with your local building inspector before you do any changes to make sure the barn's structure will still support itself with part of the 2nd floor missing. You will also need an electrician to help you with the wiring that will have to be removed and rerouted. Propane or natural gas lines have to be capped safely too.

Hope that gives you some useful ideas....

Good luck!

 

Permalink Reply by Teresa Ainslie on February 2, 2012 at 4:11am



 

Permalink Reply by Teresa Ainslie on February 2, 2012 at 4:29am

The considerable lumber we got from the removal of part of the 2nd story of our old chicken barn was reused for various other building projects around the farm.

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

I’m switching my wheat variety; do I need to change my seeding rate?

The short answer is yes; you will most likely need to change your seeding rate, but this is not just because you are planting a different wheat variety. Rather, seeding rates should be adjusted annually to reflect seed source characteristics (germination, thousand kernel weight [TKW]) and the environment the seed is being planted into, to ensure you can achieve your target plant population.   Let’s dig into why this is. For spring wheat, provincial target plant population recommendations are between 23-28 pl/ft2, with many producers targeting the upper end of this recommendation. Achieving your target plant stands sets your crops up for success, as crop uniformity is improved, weed pressure is combatted and resources are optimized.  Seeding rates should be calculated to achieve your target plant stand, which means accounting for germination percentage, expected mortality and, importantly, your TKW. TKW changes year-to-year and from variety to variety. Let’s consider an example to ill

How much 10-34-0 can be applied with my corn seed?

Oddly, I have had this conversation more this winter/spring than ever before. On paper, there is a finite answer. Anecdotally, there are a few different options and it is all dependent on soil type and soil conditions, moisture, etc. First of all, side-banding any type of fertilizer is much safer than placing it with the seed. Some fertilizers are safe in certain quantities with the seed, but very few. Side-banding is much safer and provides quick access to the roots. Midrow banding is the safest method, but roots take that much longer to access the fertilizer row, which negates the “starter” effect. The other factor that indicates the level of safety is soil moisture; the drier the soil, the more risky it is to place any fertilizer with or near the seed. I’m guilty of thinking that fertilizer toxicity to the seed is mainly due to the nitrogen content and a result of ammonia burn. Salt injury is actually more common and affects germination and early season growth, so applying fertili

AGT Food and Ingredients Inc. Announces Date for Q1 2026 Results and Conference Call

AGT Food and Ingredients Inc. (TSX: AGTF) ("AGT" or the "Company") announces the release of its Q1 2026 results on May 12, 2026 after market close and has scheduled a conference call at 8:30 a.m. Eastern time on May 13, 2026. To join the conference, please dial 1-833-821-0163 (toll free from Canada & the U.S.) or +1-647-846-7232 (from outside Canada & the U.S.). An audio replay of the conference call will be available on AGT's website after the call by visiting www.agtfoods.com. The financial statements and notes thereto for the three months ended March 31, 2026, as well as the related management's discussion and analysis will be filed on SEDAR+ at www.sedarplus.com and will also be available on the AGT website at www.agtfoods.com prior to the conference call. About AGT AGT is a globally diversified food company that produces high-quality, nutritious products for everyday consumption. Our products reach consumers in 127 countries, and our global footprint consists of 39 state-of-the

Rising Waters on the Canadian Prairies and Beyond

With flooding affecting several Canadian provinces, farmers are being urged to act quickly to protect crops, animals, infrastructure, and long-term soil health.

Is Your Bull Ready? A Year-Round Approach to Bull Management

Every cow-calf producer has either lived it or knows someone who has. Breeding season wraps up and everything looks fine, until fall preg-checks tell a different story: open cows, late calvers and a breeding window that slipped wider than planned. While cow nutrition, body condition and management are frequently evaluated, one critical factor is often underestimated—the bull. Most frustrating is that there are often no obvious warning signs during breeding. The bull was turned out, was covering cows and looked the part. On the surface, everything appeared normal. That’s exactly why a bull breeding soundness evaluation (BBSE) matters more than many producers realize. It is one of the few opportunities to take some guesswork out of bull performance. On a cow-calf operation, bulls get a lot of attention for a couple of months out of the year and very little once breeding season wraps up. The reality is that a bull’s value doesn’t start on turnout day, and it definitely doesn’t end when

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service