Ontario Agriculture

The network for agriculture in Ontario, Canada

Harrows

can someone go through the different types of harrows and what the advantage of each is?

I have found a few already like tine, spring, chain, but I am not sure what the advantage of each is.

Any help would be appreciated. 

Views: 603

▶ Reply to This

Replies to This Discussion

Permalink Reply by peasant62 on December 26, 2012 at 10:51am

Diamond harrows, bar harows, rolling harrows, etc.... What is your budget? What conditions are you heading into? (lots of residue?), What is the result you are trying to get.

I am not an expert on harrows (my disclaimer) but this is what I see. My neighbor uses his chain harrows on the pasture/hay ground in the spring (sometimes). The chain harrow has two sides with the prongs longer on one side. It can handle residue up to a certain point.

Diamond harrows are often out front of the roller after planting grain with underseeding.

Bar harrows you often see behind cultivators to level things off, you may see the tine harrows there also but they might not be as aggressive. 

Rolling harrows are sometimes behind the bar or tine harrows. They tend to firm up the soil surface more than any of the others, this may be an advantage if the wheather will be dry after planting.

The tine harrows, I have a set behind the RTS and they seem to keep up without draging too much residue along (in corn stalks).

Don't forget the spike harrows, you might see a set at an auction. I think they might have been used to level off the plowed ground in the spring.

Hope this helps and/or starts the discussion.

Peasant62

Permalink Reply by Iain Robson on December 26, 2012 at 11:42pm

Wow thanks Peasean62. Thanks for taking the time to answer my question.

I am not familiar with the diamond harrow. Do you have any pictures of one of those?

Also, is it possible to elaborate on some of the advantages of each ?

Thanks again

Permalink Reply by Joe Dales on December 31, 2012 at 8:50am

Lots of different types of harrows.

Here is a picture of my friend Larry trying a Philllips Harrow this spring on his heavy ground near Milton, Ontario.

http://ontag.farms.com/photo/phillips-rotary-harrow-in-action?conte...

 

Joe

Permalink Reply by Iain Robson on December 31, 2012 at 10:44am

Thanks Joe. 

That is a cool picture that you linked there.

Joe Dales said:

Lots of different types of harrows.

Here is a picture of my friend Larry trying a Philllips Harrow this spring on his heavy ground near Milton, Ontario.

http://ontag.farms.com/photo/phillips-rotary-harrow-in-action?conte...

 

Joe

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

McDonald’s Canada and Cargill Further Champion Youth Leadership in Beef Sustainability through partnership with the CRSB

The Canadian Roundtable for Sustainable Beef (CRSB) is proud to announce support from McDonald’s Canada and Cargill for its CRSB Council Youth Position, reinforcing their commitment to sustainability and amplifying the voices of young leaders in the Canadian beef industry. The position, an Ex-Officio (non-voting) role established in 2025, was added to the CRSB Council to ensure youth perspectives are represented and embedded in our approaches to beef sustainability now and in the future. This financial support for the position provided by McDonald’s Canada and Cargill will enable full participation in CRSB Council, member and other events for the next three years. The objectives of this CRSB Council youth position are to provide a platform for youth to actively participate in and contribute youth perspectives to the CRSB; to learn from, engage and collaborate with the multi-stakeholder representatives on the CRSB Council, and to provide youth governance experience and mentorship oppor

Purchasing the right bull can quickly move your beef herd toward your production goals. However, buying the right bull doesn’t start on sale day; it begins months in advance.

Purchasing the right bull can quickly move your beef herd toward your production goals. However, buying the right bull doesn’t start on sale day; it begins months in advance. #1: Establish Short- and Long-Term Breeding Goals Before looking at bulls, identify what you want your herd to achieve in the short and long-term. Your breeding program should align with your operation’s resources, management style and future plans. For example, knowing the traits that you want your calves to have (e.g. lighter birth weight, better growth, carcass quality, maternal traits), will better prepare you to match those goals with the genetic potential offered by available bulls. #2: Determine the Traits to Focus On Based on your goals, determine which traits to select for. As an example, if you are breeding first calf heifers, selecting bulls with higher calving ease is essential. In contrast, if you are not retaining replacement females and sell all calves after backgrounding, consider focusing on

Former ag minister Ritz remembers working with Prime Minister Harper

The former prime minister had his official portrait unveiling last week

Bonnefield joins Canadian Agriculture Investment Coalition

Bonnefield joined an investment coalition aiming to invest up to five billion dollars in Canadian agriculture and food innovation by 2030 to support growth and long-term success.

FCC Rallies Investor Coalition to Deploy Up to $5 Billion in Ag Innovation

Farm Credit Canada (FCC) has convened a coalition of more than 20 investment organizations collectively prepared to deploy up to $5 billion into Canadian agriculture and food innovation by 2030, marking what it describes as a generational investment opportunity for the sector. 

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service