Ontario Agriculture

The network for agriculture in Ontario, Canada

How is your corn harvesting progressing? Better than expected, worse, etc? Results and yields posted here.

How is your corn harvest progressing? How much do you still have to finish?

Please post your progress and yield information here to share with other farmers. Will will add the posts and pictures from Twitter that Ontario farmers are sending.

Thank you and good lulck with your harvest!

 

For soybean results click here.

 

For plot results visit the Farms.com Yield Data Centre at http://YieldData.Farms.com,

This site will be updated as soon as the results are sent in.

 

Views: 2345

Reply to This

Replies to This Discussion



 

BradNimijohnOct 17, 11:07am via Twitter for BlackBerry®

Cutting brown mid-rib silage corn with the combine sucks. It is yielding good at 160bu at 26% moisture



 

thirlwallOct 17, 8:21am via Mobile Web

Corn being combined in Newbury, soys going north of Wallaceburg. It's good to see Mr. Sun!



 

AshDee_10Oct 17, 11:49am via Twitter for BlackBerry®

Maizex 312x and 3122CB coming off north of Bright at 23-26% , 180bpa dry 



 

NWCLHartungOct 17, 3:00pm via Twitter for iPhone

Corn coming off at 22.5% by gowanstown


 

NWCLHartungOct 17, 1:50pm via Twitter for iPhone

Corn field tour around Mt forest, seeing a lot of anthracnose stalk rot



 

AdrianVanDykOct 17, 3:26pm via Web

Beans inbound to Thamesville testing 15.5 down to 14.1%. Corn running 20-21% moisture. Some wheat going in later today.



 

MrFarmerDOct 17, 7:23pm via Twitter for iPhone

#Corn #Harvest2011 has began in Dundas county took off 29 acers of NK n29t 210 bu/a#syngenta #awesome #Ethanol #payday



 

cropwizOct 17, 8:57pm via Twitter for iPhone

Started corn today on some well drained ground. Still 29% but soil conditions were decent so we keep going.



 

maize_ingOct 18, 6:20am via Twitter for BlackBerry®

Too wet to harvest soybeans? Switch to corn if moisture under 28%. Only 42 days until December



 

courtfarms5:38am via Twitter for BlackBerry®

If corn looks good it is yielding well. Average going to be 10 to 15 bu higher than previously thought

Got some off last week, 150 bushel at 19-23%. About 20% above average for yield.

RosendaleFarms profile

RosendaleFarms Check your corn fields for standability, with the wind storm coming tonight. http://t.co/XV8fKMbG

 Marvin Talsma 
 
Great results for DKC46-07, DKC43-27 and DKC42-72 in side by sides yesterday, 200 plus bushel yields for all!!

Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

I’m switching my wheat variety; do I need to change my seeding rate?

The short answer is yes; you will most likely need to change your seeding rate, but this is not just because you are planting a different wheat variety. Rather, seeding rates should be adjusted annually to reflect seed source characteristics (germination, thousand kernel weight [TKW]) and the environment the seed is being planted into, to ensure you can achieve your target plant population.   Let’s dig into why this is. For spring wheat, provincial target plant population recommendations are between 23-28 pl/ft2, with many producers targeting the upper end of this recommendation. Achieving your target plant stands sets your crops up for success, as crop uniformity is improved, weed pressure is combatted and resources are optimized.  Seeding rates should be calculated to achieve your target plant stand, which means accounting for germination percentage, expected mortality and, importantly, your TKW. TKW changes year-to-year and from variety to variety. Let’s consider an example to ill

How much 10-34-0 can be applied with my corn seed?

Oddly, I have had this conversation more this winter/spring than ever before. On paper, there is a finite answer. Anecdotally, there are a few different options and it is all dependent on soil type and soil conditions, moisture, etc. First of all, side-banding any type of fertilizer is much safer than placing it with the seed. Some fertilizers are safe in certain quantities with the seed, but very few. Side-banding is much safer and provides quick access to the roots. Midrow banding is the safest method, but roots take that much longer to access the fertilizer row, which negates the “starter” effect. The other factor that indicates the level of safety is soil moisture; the drier the soil, the more risky it is to place any fertilizer with or near the seed. I’m guilty of thinking that fertilizer toxicity to the seed is mainly due to the nitrogen content and a result of ammonia burn. Salt injury is actually more common and affects germination and early season growth, so applying fertili

AGT Food and Ingredients Inc. Announces Date for Q1 2026 Results and Conference Call

AGT Food and Ingredients Inc. (TSX: AGTF) ("AGT" or the "Company") announces the release of its Q1 2026 results on May 12, 2026 after market close and has scheduled a conference call at 8:30 a.m. Eastern time on May 13, 2026. To join the conference, please dial 1-833-821-0163 (toll free from Canada & the U.S.) or +1-647-846-7232 (from outside Canada & the U.S.). An audio replay of the conference call will be available on AGT's website after the call by visiting www.agtfoods.com. The financial statements and notes thereto for the three months ended March 31, 2026, as well as the related management's discussion and analysis will be filed on SEDAR+ at www.sedarplus.com and will also be available on the AGT website at www.agtfoods.com prior to the conference call. About AGT AGT is a globally diversified food company that produces high-quality, nutritious products for everyday consumption. Our products reach consumers in 127 countries, and our global footprint consists of 39 state-of-the

Rising Waters on the Canadian Prairies and Beyond

With flooding affecting several Canadian provinces, farmers are being urged to act quickly to protect crops, animals, infrastructure, and long-term soil health.

Is Your Bull Ready? A Year-Round Approach to Bull Management

Every cow-calf producer has either lived it or knows someone who has. Breeding season wraps up and everything looks fine, until fall preg-checks tell a different story: open cows, late calvers and a breeding window that slipped wider than planned. While cow nutrition, body condition and management are frequently evaluated, one critical factor is often underestimated—the bull. Most frustrating is that there are often no obvious warning signs during breeding. The bull was turned out, was covering cows and looked the part. On the surface, everything appeared normal. That’s exactly why a bull breeding soundness evaluation (BBSE) matters more than many producers realize. It is one of the few opportunities to take some guesswork out of bull performance. On a cow-calf operation, bulls get a lot of attention for a couple of months out of the year and very little once breeding season wraps up. The reality is that a bull’s value doesn’t start on turnout day, and it definitely doesn’t end when

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service