Ontario Agriculture

The network for agriculture in Ontario, Canada

How is your corn harvesting progressing? Better than expected, worse, etc? Results and yields posted here.

How is your corn harvest progressing? How much do you still have to finish?

Please post your progress and yield information here to share with other farmers. Will will add the posts and pictures from Twitter that Ontario farmers are sending.

Thank you and good lulck with your harvest!

 

For soybean results click here.

 

For plot results visit the Farms.com Yield Data Centre at http://YieldData.Farms.com,

This site will be updated as soon as the results are sent in.

 

Views: 2246

▶ Reply to This

Replies to This Discussion

Permalink Reply by OntAG Admin on October 19, 2011 at 4:38am


 

BradNimijohnOct 17, 11:07am via Twitter for BlackBerry®

Cutting brown mid-rib silage corn with the combine sucks. It is yielding good at 160bu at 26% moisture

Permalink Reply by OntAG Admin on October 19, 2011 at 4:38am


 

thirlwallOct 17, 8:21am via Mobile Web

Corn being combined in Newbury, soys going north of Wallaceburg. It's good to see Mr. Sun!

Permalink Reply by OntAG Admin on October 19, 2011 at 4:40am


 

AshDee_10Oct 17, 11:49am via Twitter for BlackBerry®

Maizex 312x and 3122CB coming off north of Bright at 23-26% , 180bpa dry 

Permalink Reply by OntAG Admin on October 19, 2011 at 4:41am


 

NWCLHartungOct 17, 3:00pm via Twitter for iPhone

Corn coming off at 22.5% by gowanstown


 

NWCLHartungOct 17, 1:50pm via Twitter for iPhone

Corn field tour around Mt forest, seeing a lot of anthracnose stalk rot

Permalink Reply by OntAG Admin on October 19, 2011 at 4:43am


 

AdrianVanDykOct 17, 3:26pm via Web

Beans inbound to Thamesville testing 15.5 down to 14.1%. Corn running 20-21% moisture. Some wheat going in later today.

Permalink Reply by OntAG Admin on October 19, 2011 at 4:44am


 

MrFarmerDOct 17, 7:23pm via Twitter for iPhone

#Corn #Harvest2011 has began in Dundas county took off 29 acers of NK n29t 210 bu/a#syngenta #awesome #Ethanol #payday

Permalink Reply by OntAG Admin on October 19, 2011 at 4:45am


 

cropwizOct 17, 8:57pm via Twitter for iPhone

Started corn today on some well drained ground. Still 29% but soil conditions were decent so we keep going.

Permalink Reply by OntAG Admin on October 19, 2011 at 4:47am


 

maize_ingOct 18, 6:20am via Twitter for BlackBerry®

Too wet to harvest soybeans? Switch to corn if moisture under 28%. Only 42 days until December

Permalink Reply by OntAG Admin on October 19, 2011 at 4:48am


 

courtfarms5:38am via Twitter for BlackBerry®

If corn looks good it is yielding well. Average going to be 10 to 15 bu higher than previously thought

Permalink Reply by Dale Ketcheson on October 19, 2011 at 4:51am

Got some off last week, 150 bushel at 19-23%. About 20% above average for yield.

Permalink Reply by OntAG Admin on October 19, 2011 at 10:45am

RosendaleFarms profile

RosendaleFarms Check your corn fields for standability, with the wind storm coming tonight. http://t.co/XV8fKMbG

Permalink Reply by OntAG Admin on October 20, 2011 at 5:17am
 Marvin Talsma 
 
Great results for DKC46-07, DKC43-27 and DKC42-72 in side by sides yesterday, 200 plus bushel yields for all!!

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

AAFC response to planned cuts

The ministry is committed to investing in science and strengthening collaboration

Canada’s Ag Day Is Coming Soon – Here is why it matters!

Canada’s Ag Day is a chance to highlight trust in the food system is essential, fragile, and built through ongoing connection between farmers and Canadians.

Red Tape Pushes 70% of Agri Businesses to Deter Next Generation from Farming

A new CFIB report reveals that Canada’s agriculture sector is buckling under regulatory overload, with most agri business owners discouraging successors from taking over.

Provincial insect specialist says to "be vigilant" for pests during 2026 season

There was significant spraying of canola for bertha armyworm in central and northern regions of Saskatchewan last year and there may be issues again in 2026, says Dr. James Tansey, provincial insect specialist with the Saskatchewan Ministry of Agriculture. Tansey spoke Tuesday during a webinar sponsored by the Ministry of Ag. The Ministry captured male moths in traps at 290 site locations during mid and late July, Some of the hot spots were places like Herschel, Landis and Sonningdale west of Saskatoon, as well as Nokomis and Jansen south and east of Saskatoon. Moderate bertha army worm moths numbers were found east of Prince Albert and in the Tisdale area. Tansey says bertha army worm outbreaks are not usually one year events. However, he adds there is a naturally occurring virus which kills bertha armyworm called nuclear polyhedrosis virus (NPV). NPV causes the infected larvae to liquefy and any contact with it can make it burst. "We did see occurrence of this virus. Was it numer

Oat sector eyes potential opportunity in China

Canada is the world’s largest exporter of oats. China is the world’s second largest importer of oats. This seems, on paper, like a good opportunity for a trading relationship. However, Canada only ships a tiny volume of oats to China because Australia and Russia supply 98.7 per cent of the country’s annual oat imports, says OatInformation.com, an oat market intelligence firm. The main obstacle blocking exports is the lack of a phytosanitary protocol for Canadian raw oats in China. “We can send them processed oats and we can send seed oats, but we cannot send raw oats,” said Shawna Mathieson, Prairie Oat Growers Association executive director. That’s a problem because China wants to import raw oats rather than milled oats from its suppliers. “The thing with China, they have a lot of milling capacity…. They want to take the raw oats so they can use their own mills.” China’s phytosanitary issues with Canadian oats is a bit of mystery because Chinese officials won’t specify the pro

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service