Ontario Agriculture

The network for agriculture in Ontario, Canada

How is your corn harvesting progressing? Better than expected, worse, etc? Results and yields posted here.

How is your corn harvest progressing? How much do you still have to finish?

Please post your progress and yield information here to share with other farmers. Will will add the posts and pictures from Twitter that Ontario farmers are sending.

Thank you and good lulck with your harvest!

 

For soybean results click here.

 

For plot results visit the Farms.com Yield Data Centre at http://YieldData.Farms.com,

This site will be updated as soon as the results are sent in.

 

Views: 2381

▶ Reply to This

Replies to This Discussion

Permalink Reply by OntAG Admin on October 19, 2011 at 4:38am


 

BradNimijohnOct 17, 11:07am via Twitter for BlackBerry®

Cutting brown mid-rib silage corn with the combine sucks. It is yielding good at 160bu at 26% moisture

Permalink Reply by OntAG Admin on October 19, 2011 at 4:38am


 

thirlwallOct 17, 8:21am via Mobile Web

Corn being combined in Newbury, soys going north of Wallaceburg. It's good to see Mr. Sun!

Permalink Reply by OntAG Admin on October 19, 2011 at 4:40am


 

AshDee_10Oct 17, 11:49am via Twitter for BlackBerry®

Maizex 312x and 3122CB coming off north of Bright at 23-26% , 180bpa dry 

Permalink Reply by OntAG Admin on October 19, 2011 at 4:41am


 

NWCLHartungOct 17, 3:00pm via Twitter for iPhone

Corn coming off at 22.5% by gowanstown


 

NWCLHartungOct 17, 1:50pm via Twitter for iPhone

Corn field tour around Mt forest, seeing a lot of anthracnose stalk rot

Permalink Reply by OntAG Admin on October 19, 2011 at 4:43am


 

AdrianVanDykOct 17, 3:26pm via Web

Beans inbound to Thamesville testing 15.5 down to 14.1%. Corn running 20-21% moisture. Some wheat going in later today.

Permalink Reply by OntAG Admin on October 19, 2011 at 4:44am


 

MrFarmerDOct 17, 7:23pm via Twitter for iPhone

#Corn #Harvest2011 has began in Dundas county took off 29 acers of NK n29t 210 bu/a#syngenta #awesome #Ethanol #payday

Permalink Reply by OntAG Admin on October 19, 2011 at 4:45am


 

cropwizOct 17, 8:57pm via Twitter for iPhone

Started corn today on some well drained ground. Still 29% but soil conditions were decent so we keep going.

Permalink Reply by OntAG Admin on October 19, 2011 at 4:47am


 

maize_ingOct 18, 6:20am via Twitter for BlackBerry®

Too wet to harvest soybeans? Switch to corn if moisture under 28%. Only 42 days until December

Permalink Reply by OntAG Admin on October 19, 2011 at 4:48am


 

courtfarms5:38am via Twitter for BlackBerry®

If corn looks good it is yielding well. Average going to be 10 to 15 bu higher than previously thought

Permalink Reply by Dale Ketcheson on October 19, 2011 at 4:51am

Got some off last week, 150 bushel at 19-23%. About 20% above average for yield.

Permalink Reply by OntAG Admin on October 19, 2011 at 10:45am

RosendaleFarms profile

RosendaleFarms Check your corn fields for standability, with the wind storm coming tonight. http://t.co/XV8fKMbG

Permalink Reply by OntAG Admin on October 20, 2011 at 5:17am
 Marvin Talsma 
 
Great results for DKC46-07, DKC43-27 and DKC42-72 in side by sides yesterday, 200 plus bushel yields for all!!

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

10% of the Cows, Half the Beef Exported: How Canada Punches Above Its Weight

With just under 3.5 million beef cows and a fed kill shy of 3 million head, Canada raises a fraction of North America’s cattle — but exports roughly half of what it produces as live cattle or beef. Canadian Cattle Association (CCA) General Manager Ryder Lee says Alberta–Saskatchewan cow country, Ontario and Alberta feeding hubs, and U.S. packing plants in Washington, Utah and Pennsylvania are tightly interlinked, making border access and science-based trade rules non-negotiable for producers on both sides. Raised on a commercial cow-calf operation in southern Saskatchewan — just 20 miles north of Montana — Lee grew up in what he describes as “cattle country.” After earning an animal science degree, he spent six years in agricultural sales with Dow AgroSciences before stumbling into cattle industry association work. He spent a decade in Ottawa doing policy lobbying, then served seven years as CEO of the Saskatchewan Cattlemen’s Association before joining CCA as General Manager three y

Agricultural giant at centre of urban-rural housing divide in Ontario border city

It's been all about building as many new homes as possible in Ontario recently, but now a big corporation wants to stop housing projects in the Sarnia area — something that’s pitting rural and urban communities against one another. Cargill wants the provincial government to utilize its Minister’s Zoning Order (MZO) for the opposite reason it was originally intended. The tool has become increasingly common as Ontario pushes to build 1.5 million homes by 2031. An MZO allows the housing minister to override the local planning process and make decisions directly. Usually, that means speeding up development. But in Sarnia, Cargill wants Minister of Municipal Affairs of Housing Rob Flack to step in and block new homes from being built near its property. The company is one of the biggest agricultural corporations in the world, and it operates a large grain terminal at Sarnia Harbour. This is where farmers truck their corn, soybeans and wheat at harvest time. Some of the product also comes

KIOTI entering mini excavator market

On June 2 the manufacturer announced the release of the MX Series mini excavators

CFIA Reports Show Strong Canadian Food Safety Compliance Across National Testing Programs

New CFIA testing results show consistently high compliance across Canada’s food supply, supporting consumer confidence and trade credibility.

: Ontario Crops Show Strong Start Despite Weather Challenges

Ontario crops show steady progress with near-complete planting, early growth challenges, and rising weed and disease concerns across corn, soybean, and wheat fields.

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service