Ontario Agriculture

The network for agriculture in Ontario, Canada

this years bean harvest

how are peoples soybeans looking any funguses or bug problems?

Views: 636

▶ Reply to This

Replies to This Discussion

Permalink Reply by Roadrunner on September 1, 2009 at 1:54pm
With all the rain it seems like lots of fields have weed escapes.

We need more heat and no early frost!!!!!!!!!

Roadrunner

Beep Beep
Permalink Reply by Peter Gredig on September 3, 2009 at 7:36am
Aphid #'s are on the rise in soys, but most fields are at R5 or R6 which means it's too late to spray. Never seen corn this tall - the old saying is the later you plant, the taller the corn, and in some fields that appears to be true. Primary cob is set 5.5 feet off the ground!! I think there is a decent crop of soys and corn out there, but we are vulnerable to running out of heat units before physiological maturity. Propane/natural gas sellers will do alright this fall - the corn dryers will be running hard.

I'm hearing that edible bean crops are full of mold/anthracnose. Can anyone verify that?

AgWag
Permalink Reply by Wayne Black on September 4, 2009 at 3:53am
We had our soybeans sprayed for Aphids last month the week of the tornado through Durham. We only had 3/4 inch yet 4 km west one farmer who did not spray had 2 to 3 inches of rain - blasted those bugs! I still had more Aphids than he did a few days later.
First time spraying for aphids. Never seen them so thick - should have taken some photos!
Location - north west Huron County.

Wayne
Permalink Reply by James Ferrier on September 4, 2009 at 9:16am
A fair bit of white mold on our white and black beans. I could see there beeing as much as 40 % crop loss in a few fields but thats not saying alot since the crop looked like it could have doubled last year's earlier on.

Peter Gredig said:
Aphid #'s are on the rise in soys, but most fields are at R5 or R6 which means it's too late to spray. Never seen corn this tall - the old saying is the later you plant, the taller the corn, and in some fields that appears to be true. Primary cob is set 5.5 feet off the ground!! I think there is a decent crop of soys and corn out there, but we are vulnerable to running out of heat units before physiological maturity. Propane/natural gas sellers will do alright this fall - the corn dryers will be running hard.

I'm hearing that edible bean crops are full of mold/anthracnose. Can anyone verify that?

AgWag
Permalink Reply by Joe Dales on September 6, 2009 at 4:09am
Just back from a nice midwest us crop tour through Illinois, Indiana and Michigan....here is a field near the Decatur, IL Farm Progress show...local farmers there say the crop is 3-4 weeks behind but it is looking good.

Permalink Reply by John Beardsley on September 10, 2009 at 11:53am
soys ..a lot of aphid spraying all neccessary????

wb cruiser did a mint job some had to still spray once late for leaf hopper
white mold rampant...should have sprayed 2x????
Permalink Reply by OntAG Admin on September 13, 2009 at 6:18am
The Farms.com Yield Data Centre is ready for Soybean and Corn Test plot Data.

http://www.yielddata.farms.com

We will be entering data once the plots are off.

If you have field level yields, report them here with your location and the varieties.

Thanks,

OntAg Farms.com team

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

AAFC response to planned cuts

The ministry is committed to investing in science and strengthening collaboration

Canada’s Ag Day Is Coming Soon – Here is why it matters!

Canada’s Ag Day is a chance to highlight trust in the food system is essential, fragile, and built through ongoing connection between farmers and Canadians.

Red Tape Pushes 70% of Agri Businesses to Deter Next Generation from Farming

A new CFIB report reveals that Canada’s agriculture sector is buckling under regulatory overload, with most agri business owners discouraging successors from taking over.

Provincial insect specialist says to "be vigilant" for pests during 2026 season

There was significant spraying of canola for bertha armyworm in central and northern regions of Saskatchewan last year and there may be issues again in 2026, says Dr. James Tansey, provincial insect specialist with the Saskatchewan Ministry of Agriculture. Tansey spoke Tuesday during a webinar sponsored by the Ministry of Ag. The Ministry captured male moths in traps at 290 site locations during mid and late July, Some of the hot spots were places like Herschel, Landis and Sonningdale west of Saskatoon, as well as Nokomis and Jansen south and east of Saskatoon. Moderate bertha army worm moths numbers were found east of Prince Albert and in the Tisdale area. Tansey says bertha army worm outbreaks are not usually one year events. However, he adds there is a naturally occurring virus which kills bertha armyworm called nuclear polyhedrosis virus (NPV). NPV causes the infected larvae to liquefy and any contact with it can make it burst. "We did see occurrence of this virus. Was it numer

Oat sector eyes potential opportunity in China

Canada is the world’s largest exporter of oats. China is the world’s second largest importer of oats. This seems, on paper, like a good opportunity for a trading relationship. However, Canada only ships a tiny volume of oats to China because Australia and Russia supply 98.7 per cent of the country’s annual oat imports, says OatInformation.com, an oat market intelligence firm. The main obstacle blocking exports is the lack of a phytosanitary protocol for Canadian raw oats in China. “We can send them processed oats and we can send seed oats, but we cannot send raw oats,” said Shawna Mathieson, Prairie Oat Growers Association executive director. That’s a problem because China wants to import raw oats rather than milled oats from its suppliers. “The thing with China, they have a lot of milling capacity…. They want to take the raw oats so they can use their own mills.” China’s phytosanitary issues with Canadian oats is a bit of mystery because Chinese officials won’t specify the pro

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service