Ontario Agriculture

The network for agriculture in Ontario, Canada

this years bean harvest

how are peoples soybeans looking any funguses or bug problems?

Views: 661

▶ Reply to This

Replies to This Discussion

Permalink Reply by Roadrunner on September 1, 2009 at 1:54pm
With all the rain it seems like lots of fields have weed escapes.

We need more heat and no early frost!!!!!!!!!

Roadrunner

Beep Beep
Permalink Reply by Peter Gredig on September 3, 2009 at 7:36am
Aphid #'s are on the rise in soys, but most fields are at R5 or R6 which means it's too late to spray. Never seen corn this tall - the old saying is the later you plant, the taller the corn, and in some fields that appears to be true. Primary cob is set 5.5 feet off the ground!! I think there is a decent crop of soys and corn out there, but we are vulnerable to running out of heat units before physiological maturity. Propane/natural gas sellers will do alright this fall - the corn dryers will be running hard.

I'm hearing that edible bean crops are full of mold/anthracnose. Can anyone verify that?

AgWag
Permalink Reply by Wayne Black on September 4, 2009 at 3:53am
We had our soybeans sprayed for Aphids last month the week of the tornado through Durham. We only had 3/4 inch yet 4 km west one farmer who did not spray had 2 to 3 inches of rain - blasted those bugs! I still had more Aphids than he did a few days later.
First time spraying for aphids. Never seen them so thick - should have taken some photos!
Location - north west Huron County.

Wayne
Permalink Reply by James Ferrier on September 4, 2009 at 9:16am
A fair bit of white mold on our white and black beans. I could see there beeing as much as 40 % crop loss in a few fields but thats not saying alot since the crop looked like it could have doubled last year's earlier on.

Peter Gredig said:
Aphid #'s are on the rise in soys, but most fields are at R5 or R6 which means it's too late to spray. Never seen corn this tall - the old saying is the later you plant, the taller the corn, and in some fields that appears to be true. Primary cob is set 5.5 feet off the ground!! I think there is a decent crop of soys and corn out there, but we are vulnerable to running out of heat units before physiological maturity. Propane/natural gas sellers will do alright this fall - the corn dryers will be running hard.

I'm hearing that edible bean crops are full of mold/anthracnose. Can anyone verify that?

AgWag
Permalink Reply by Joe Dales on September 6, 2009 at 4:09am
Just back from a nice midwest us crop tour through Illinois, Indiana and Michigan....here is a field near the Decatur, IL Farm Progress show...local farmers there say the crop is 3-4 weeks behind but it is looking good.

Permalink Reply by John Beardsley on September 10, 2009 at 11:53am
soys ..a lot of aphid spraying all neccessary????

wb cruiser did a mint job some had to still spray once late for leaf hopper
white mold rampant...should have sprayed 2x????
Permalink Reply by OntAG Admin on September 13, 2009 at 6:18am
The Farms.com Yield Data Centre is ready for Soybean and Corn Test plot Data.

http://www.yielddata.farms.com

We will be entering data once the plots are off.

If you have field level yields, report them here with your location and the varieties.

Thanks,

OntAg Farms.com team

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

I’m switching my wheat variety; do I need to change my seeding rate?

The short answer is yes; you will most likely need to change your seeding rate, but this is not just because you are planting a different wheat variety. Rather, seeding rates should be adjusted annually to reflect seed source characteristics (germination, thousand kernel weight [TKW]) and the environment the seed is being planted into, to ensure you can achieve your target plant population.   Let’s dig into why this is. For spring wheat, provincial target plant population recommendations are between 23-28 pl/ft2, with many producers targeting the upper end of this recommendation. Achieving your target plant stands sets your crops up for success, as crop uniformity is improved, weed pressure is combatted and resources are optimized.  Seeding rates should be calculated to achieve your target plant stand, which means accounting for germination percentage, expected mortality and, importantly, your TKW. TKW changes year-to-year and from variety to variety. Let’s consider an example to ill

How much 10-34-0 can be applied with my corn seed?

Oddly, I have had this conversation more this winter/spring than ever before. On paper, there is a finite answer. Anecdotally, there are a few different options and it is all dependent on soil type and soil conditions, moisture, etc. First of all, side-banding any type of fertilizer is much safer than placing it with the seed. Some fertilizers are safe in certain quantities with the seed, but very few. Side-banding is much safer and provides quick access to the roots. Midrow banding is the safest method, but roots take that much longer to access the fertilizer row, which negates the “starter” effect. The other factor that indicates the level of safety is soil moisture; the drier the soil, the more risky it is to place any fertilizer with or near the seed. I’m guilty of thinking that fertilizer toxicity to the seed is mainly due to the nitrogen content and a result of ammonia burn. Salt injury is actually more common and affects germination and early season growth, so applying fertili

AGT Food and Ingredients Inc. Announces Date for Q1 2026 Results and Conference Call

AGT Food and Ingredients Inc. (TSX: AGTF) ("AGT" or the "Company") announces the release of its Q1 2026 results on May 12, 2026 after market close and has scheduled a conference call at 8:30 a.m. Eastern time on May 13, 2026. To join the conference, please dial 1-833-821-0163 (toll free from Canada & the U.S.) or +1-647-846-7232 (from outside Canada & the U.S.). An audio replay of the conference call will be available on AGT's website after the call by visiting www.agtfoods.com. The financial statements and notes thereto for the three months ended March 31, 2026, as well as the related management's discussion and analysis will be filed on SEDAR+ at www.sedarplus.com and will also be available on the AGT website at www.agtfoods.com prior to the conference call. About AGT AGT is a globally diversified food company that produces high-quality, nutritious products for everyday consumption. Our products reach consumers in 127 countries, and our global footprint consists of 39 state-of-the

Rising Waters on the Canadian Prairies and Beyond

With flooding affecting several Canadian provinces, farmers are being urged to act quickly to protect crops, animals, infrastructure, and long-term soil health.

Is Your Bull Ready? A Year-Round Approach to Bull Management

Every cow-calf producer has either lived it or knows someone who has. Breeding season wraps up and everything looks fine, until fall preg-checks tell a different story: open cows, late calvers and a breeding window that slipped wider than planned. While cow nutrition, body condition and management are frequently evaluated, one critical factor is often underestimated—the bull. Most frustrating is that there are often no obvious warning signs during breeding. The bull was turned out, was covering cows and looked the part. On the surface, everything appeared normal. That’s exactly why a bull breeding soundness evaluation (BBSE) matters more than many producers realize. It is one of the few opportunities to take some guesswork out of bull performance. On a cow-calf operation, bulls get a lot of attention for a couple of months out of the year and very little once breeding season wraps up. The reality is that a bull’s value doesn’t start on turnout day, and it definitely doesn’t end when

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service