Ontario Agriculture

The network for agriculture in Ontario, Canada

this years bean harvest

how are peoples soybeans looking any funguses or bug problems?

Views: 675

▶ Reply to This

Replies to This Discussion

Permalink Reply by Roadrunner on September 1, 2009 at 1:54pm
With all the rain it seems like lots of fields have weed escapes.

We need more heat and no early frost!!!!!!!!!

Roadrunner

Beep Beep
Permalink Reply by Peter Gredig on September 3, 2009 at 7:36am
Aphid #'s are on the rise in soys, but most fields are at R5 or R6 which means it's too late to spray. Never seen corn this tall - the old saying is the later you plant, the taller the corn, and in some fields that appears to be true. Primary cob is set 5.5 feet off the ground!! I think there is a decent crop of soys and corn out there, but we are vulnerable to running out of heat units before physiological maturity. Propane/natural gas sellers will do alright this fall - the corn dryers will be running hard.

I'm hearing that edible bean crops are full of mold/anthracnose. Can anyone verify that?

AgWag
Permalink Reply by Wayne Black on September 4, 2009 at 3:53am
We had our soybeans sprayed for Aphids last month the week of the tornado through Durham. We only had 3/4 inch yet 4 km west one farmer who did not spray had 2 to 3 inches of rain - blasted those bugs! I still had more Aphids than he did a few days later.
First time spraying for aphids. Never seen them so thick - should have taken some photos!
Location - north west Huron County.

Wayne
Permalink Reply by James Ferrier on September 4, 2009 at 9:16am
A fair bit of white mold on our white and black beans. I could see there beeing as much as 40 % crop loss in a few fields but thats not saying alot since the crop looked like it could have doubled last year's earlier on.

Peter Gredig said:
Aphid #'s are on the rise in soys, but most fields are at R5 or R6 which means it's too late to spray. Never seen corn this tall - the old saying is the later you plant, the taller the corn, and in some fields that appears to be true. Primary cob is set 5.5 feet off the ground!! I think there is a decent crop of soys and corn out there, but we are vulnerable to running out of heat units before physiological maturity. Propane/natural gas sellers will do alright this fall - the corn dryers will be running hard.

I'm hearing that edible bean crops are full of mold/anthracnose. Can anyone verify that?

AgWag
Permalink Reply by Joe Dales on September 6, 2009 at 4:09am
Just back from a nice midwest us crop tour through Illinois, Indiana and Michigan....here is a field near the Decatur, IL Farm Progress show...local farmers there say the crop is 3-4 weeks behind but it is looking good.

Permalink Reply by John Beardsley on September 10, 2009 at 11:53am
soys ..a lot of aphid spraying all neccessary????

wb cruiser did a mint job some had to still spray once late for leaf hopper
white mold rampant...should have sprayed 2x????
Permalink Reply by OntAG Admin on September 13, 2009 at 6:18am
The Farms.com Yield Data Centre is ready for Soybean and Corn Test plot Data.

http://www.yielddata.farms.com

We will be entering data once the plots are off.

If you have field level yields, report them here with your location and the varieties.

Thanks,

OntAg Farms.com team

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

Minister MacDonald sets the stage ahead of NPF meetings

Ministers and other stakeholders are in Halifax this week

Farm Management Canada launches Canada’s Young Farmers

The platform is designed to support and amplify the next generation of Canadian ag leaders

Watch for the development of Sclerotinia stem rot in canola

Information is OFFERED TO THE PUBLIC FOR INFORMATIONAL PURPOSES ONLY. Agriculture and Agri-Food Canada, Environment Canada, and their employees assume no liability from the use of this information.   June surface soil moisture conditions indicate that much of the Prairie canola growing region currently has sufficient soil moisture to support germination of Sclerotinia sclerotiorum sclerotia (Fig. 1). Cumulative rainfall from May 30 – June 28 was the highest in the Edmonton, Lethbridge, Winnipeg areas, and lowest in northern Saskatchewan and the Peace River area of Alberta (Fig. 2). When rainfall over the whole growing season (April 1 – June 28) was considered, the Edmonton area was much higher than average (Fig. 3). Recent heavy rains across the Prairies have significantly increased these amounts. Temperature over the May 30 – June 28 period was highest in southern Manitoba and eastern Saskatchewan and lowest in western Alberta (Fig. 4). For the whole growing season temperatures have

Table Beet Harvest has Begun

Ontario's 2026 fresh beet harvest is underway with a positive outlook and steady supply, reinforcing the province's position as Canada's leading producer of this resilient crop.

Cereal rust risk report April 1 to June 29 2026 stripe rust reported in Alberta and eastern Canada along with leaf and stem rust in eastern Canada

Stripe rust development in Alberta There are reports of stripe rust developing in Alberta, though at low levels to date. The wheat crop is maturing in the Pacific Northwest and will decline as a source of inoculum as it is harvested. The spread and development of stripe rust in Alberta now depends more on weather and crop conditions within the province going forward. No rust reports to date in Saskatchewan and Manitoba Cereal crops in the southern US states have nearly been harvested and were affected severely by drought this crop season. Spring cereals in the northern states are still developing but there are no reports to date of rust infection in these northern states. Crop development in many parts of Saskatchewan and Manitoba is delayed relative to normal, and frequent and heavy rains raise the risk of disease development in all crops. To date though there have been no reports of rust development in Saskatchewan and Manitoba. Cereal rusts reported in eastern Canada Colleagues

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service