Ontario Agriculture

The network for agriculture in Ontario, Canada

this years bean harvest

how are peoples soybeans looking any funguses or bug problems?

Views: 688

▶ Reply to This

Replies to This Discussion

Permalink Reply by Roadrunner on September 1, 2009 at 1:54pm
With all the rain it seems like lots of fields have weed escapes.

We need more heat and no early frost!!!!!!!!!

Roadrunner

Beep Beep
Permalink Reply by Peter Gredig on September 3, 2009 at 7:36am
Aphid #'s are on the rise in soys, but most fields are at R5 or R6 which means it's too late to spray. Never seen corn this tall - the old saying is the later you plant, the taller the corn, and in some fields that appears to be true. Primary cob is set 5.5 feet off the ground!! I think there is a decent crop of soys and corn out there, but we are vulnerable to running out of heat units before physiological maturity. Propane/natural gas sellers will do alright this fall - the corn dryers will be running hard.

I'm hearing that edible bean crops are full of mold/anthracnose. Can anyone verify that?

AgWag
Permalink Reply by Wayne Black on September 4, 2009 at 3:53am
We had our soybeans sprayed for Aphids last month the week of the tornado through Durham. We only had 3/4 inch yet 4 km west one farmer who did not spray had 2 to 3 inches of rain - blasted those bugs! I still had more Aphids than he did a few days later.
First time spraying for aphids. Never seen them so thick - should have taken some photos!
Location - north west Huron County.

Wayne
Permalink Reply by James Ferrier on September 4, 2009 at 9:16am
A fair bit of white mold on our white and black beans. I could see there beeing as much as 40 % crop loss in a few fields but thats not saying alot since the crop looked like it could have doubled last year's earlier on.

Peter Gredig said:
Aphid #'s are on the rise in soys, but most fields are at R5 or R6 which means it's too late to spray. Never seen corn this tall - the old saying is the later you plant, the taller the corn, and in some fields that appears to be true. Primary cob is set 5.5 feet off the ground!! I think there is a decent crop of soys and corn out there, but we are vulnerable to running out of heat units before physiological maturity. Propane/natural gas sellers will do alright this fall - the corn dryers will be running hard.

I'm hearing that edible bean crops are full of mold/anthracnose. Can anyone verify that?

AgWag
Permalink Reply by Joe Dales on September 6, 2009 at 4:09am
Just back from a nice midwest us crop tour through Illinois, Indiana and Michigan....here is a field near the Decatur, IL Farm Progress show...local farmers there say the crop is 3-4 weeks behind but it is looking good.

Permalink Reply by John Beardsley on September 10, 2009 at 11:53am
soys ..a lot of aphid spraying all neccessary????

wb cruiser did a mint job some had to still spray once late for leaf hopper
white mold rampant...should have sprayed 2x????
Permalink Reply by OntAG Admin on September 13, 2009 at 6:18am
The Farms.com Yield Data Centre is ready for Soybean and Corn Test plot Data.

http://www.yielddata.farms.com

We will be entering data once the plots are off.

If you have field level yields, report them here with your location and the varieties.

Thanks,

OntAg Farms.com team

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

Supporting B.C. tech strengthens general aviation emergency response

Two B.C. companies are receiving provincial support to deploy clean-energy technology that strengthens backup power reliability for general aviation aircraft in B.C., replacing diesel generators with battery storage to keep critical services, such as wildfire response, medical transport and search and rescue, running during emergencies. With as much as $1 million being provided through B.C.’s Integrated Marketplace, Abbotsford-based Fast Air will deploy a mobile battery and solar power system developed by Richmond-based Holinova at the Abbotsford International Airport. The system is designed to power ground equipment and aircraft charging needs without relying on the electrical grid, providing a cleaner alternative to traditional diesel-powered backup power systems and helping maintain operations during outages or high-demand situations. The project is anticipated to improve charging efficiency, support flexible aircraft movements and enhance operational resilience during periods of

Protein Industries Canada invests in AI technology to boost on-farm productivity and bring new solutions to farmers

Protein Industries Canada is investing in two new artificial intelligence (AI) projects to help Canadian farmers and the value-added agriculture sector improve on-farm productivity with new tools, supporting a stronger, more sustainable and competitive food system. Together, the projects represent a total investment of $4.9 million, including up to $2.2 million from Protein Industries Canada, and will help growers act earlier on disease risk, and improve safety and accuracy in grain storage. “Canadian farmers are increasingly adopting cutting-edge technologies to strengthen productivity, sustainability and global competitiveness,” said the Honourable Mélanie Joly, Minister of Industry and Minister responsible for Canada Economic Development for Quebec Regions. “Through Protein Industries Canada, one of Canada’s global innovation clusters, we are investing in made-in-Canada AI solutions to help producers protect their yields, optimize inventory management and make informed business de

Seed-treatment timing critical

Most seed put into the ground in the Midwest is treated, but the jury is still out as to the most effective use of chemical and biological additives. There’s little doubt that treatments are beneficial but there’s much to be learned. “What’s probably getting more growth is on the inoculants side,” said Connor Sible, a University of Illinois professor who has conducted various research projects on treatments. He said inoculants are increasingly being chosen for aiding plant growth rather than battling pests. “A lot of products added are targeting nutrient availability,” he said. “There’s been a lot of research in the (United) States and internationally – greenhouse studies in very controlled environments.” An extensive study by scientists at REVA University in Bangalore, India, indicates that “seed priming” is a cost-effective strategy for improving plant health and development. The study report compiles information from almost 400 studies worldwide. It shows that biological seed tr

Trail King: Transport solutions for every trailer owner

Replace or refurbish? It’s a question every hauling trailer owner encounters at some point down the road. According to the experts at Trail King Industries, Inc., the right time to evaluate a trailer’s future depends primarily on age, total mileage and usage. While some owners might use their trailer two to three times a week for their own business needs, others are operating a business and may run their trailers every day throughout the year. Trail King Industries, Inc., headquartered in Mitchell, South Dakota, is the leading manufacturer of a complete line of hauling trailers in North America. Since 1974, the company has designed, engineered and manufactured trailers across diverse industries including construction, agriculture, waste and recycling, transportation and specialized hauling. Its experienced teams help provide solutions to hauling challenges whether that entails paint, parts, trailer refurbishment services, customer service or warranty issues. According to the company

Canadian Innovation Aims to Transform Nitrogen Fertilizers While Eliminating Microplastics

A British Columbia ag-tech company is developing a biodegradable fertilizer coating that could help farmers use less nitrogen, reduce input costs, and eliminate microplastics from controlled-release fertilizers

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service