Ontario Agriculture

The network for agriculture in Ontario, Canada

this years bean harvest

how are peoples soybeans looking any funguses or bug problems?

Views: 692

▶ Reply to This

Replies to This Discussion

Permalink Reply by Roadrunner on September 1, 2009 at 1:54pm
With all the rain it seems like lots of fields have weed escapes.

We need more heat and no early frost!!!!!!!!!

Roadrunner

Beep Beep
Permalink Reply by Peter Gredig on September 3, 2009 at 7:36am
Aphid #'s are on the rise in soys, but most fields are at R5 or R6 which means it's too late to spray. Never seen corn this tall - the old saying is the later you plant, the taller the corn, and in some fields that appears to be true. Primary cob is set 5.5 feet off the ground!! I think there is a decent crop of soys and corn out there, but we are vulnerable to running out of heat units before physiological maturity. Propane/natural gas sellers will do alright this fall - the corn dryers will be running hard.

I'm hearing that edible bean crops are full of mold/anthracnose. Can anyone verify that?

AgWag
Permalink Reply by Wayne Black on September 4, 2009 at 3:53am
We had our soybeans sprayed for Aphids last month the week of the tornado through Durham. We only had 3/4 inch yet 4 km west one farmer who did not spray had 2 to 3 inches of rain - blasted those bugs! I still had more Aphids than he did a few days later.
First time spraying for aphids. Never seen them so thick - should have taken some photos!
Location - north west Huron County.

Wayne
Permalink Reply by James Ferrier on September 4, 2009 at 9:16am
A fair bit of white mold on our white and black beans. I could see there beeing as much as 40 % crop loss in a few fields but thats not saying alot since the crop looked like it could have doubled last year's earlier on.

Peter Gredig said:
Aphid #'s are on the rise in soys, but most fields are at R5 or R6 which means it's too late to spray. Never seen corn this tall - the old saying is the later you plant, the taller the corn, and in some fields that appears to be true. Primary cob is set 5.5 feet off the ground!! I think there is a decent crop of soys and corn out there, but we are vulnerable to running out of heat units before physiological maturity. Propane/natural gas sellers will do alright this fall - the corn dryers will be running hard.

I'm hearing that edible bean crops are full of mold/anthracnose. Can anyone verify that?

AgWag
Permalink Reply by Joe Dales on September 6, 2009 at 4:09am
Just back from a nice midwest us crop tour through Illinois, Indiana and Michigan....here is a field near the Decatur, IL Farm Progress show...local farmers there say the crop is 3-4 weeks behind but it is looking good.

Permalink Reply by John Beardsley on September 10, 2009 at 11:53am
soys ..a lot of aphid spraying all neccessary????

wb cruiser did a mint job some had to still spray once late for leaf hopper
white mold rampant...should have sprayed 2x????
Permalink Reply by OntAG Admin on September 13, 2009 at 6:18am
The Farms.com Yield Data Centre is ready for Soybean and Corn Test plot Data.

http://www.yielddata.farms.com

We will be entering data once the plots are off.

If you have field level yields, report them here with your location and the varieties.

Thanks,

OntAg Farms.com team

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

Equipment Technician Demand Reaches New Highs

A new report warns Canada will need thousands of equipment technicians in the next decade, with labor shortages affecting dealer growth, customer service, and industry revenue.

Canada Could Add $5.4 Billion by Food Processing in the Country

Shifting 10 per cent of Canada’s raw crop exports to domestic processing could boost the economy by $5.4 billion and create 34,000 jobs, according to a new report from EY.

New herbicide for soybean producers

Growers can implement Zidua Prime into their operations for the 2027 season

Canfax Weekly Article | Report for the week of September 21, 2026

The Canfax average fed steer and heifer price closed around $292/cwt live, $2.50/cwt lower than the previous week. Fed cattle prices are at the lowest point since December 2025. Light trade was reported last week with dressed sales ranging from $486.50–$489.50/cwt FOB the feedlot. Cattle that traded were scheduled anywhere from early October to early November delivery. Western Canadian steer carcass weights have steadily increased this summer and are 2 pounds shy of their highs set back in January. Ontario was the bright spot for the Canadian fed market as their prices strengthened last week. Last week, the Canfax feeder steer and heifer price closed the week $8–$11/cwt higher. Despite higher prices, all classes of cattle are trading below last year. With good grass conditions across much of the Prairies, the yearling run has been slow to develop. Over the past week, there was a bigger offering of forward delivery calves with over 50,000 head marketed for fall delivery. In some cases,

U.S. August cattle placements fall to record low

U.S. feedlots placed fewer cattle in August than in any other August since the data series began in 1996, according to the latest Cattle on Feed report from the United States Department of Agriculture (USDA). Despite the decline, cattle and calves on feed for the slaughter market in feedlots with a capacity of 1,000 head or more totalled 11.2 million head as of September 1, up one per cent from a year earlier. August placements totalled 1.62 million head, down nine per cent from the previous year. Net placements were reported at 1.57 million head. USDA data shows it was the lowest August placement total since the series began in 1996. The report was largely in line with pre-report trade expectations, which anticipated lower placements and marketings alongside slightly higher on-feed inventories. Marketings during August totaled 1.52 million head, down three per cent from the same month last year. It was also the lowest August marketing total since 1996. Other disappearance totaled

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service