Ontario Agriculture

The network for agriculture in Ontario, Canada

this years bean harvest

how are peoples soybeans looking any funguses or bug problems?

Views: 705

▶ Reply to This

Replies to This Discussion

Permalink Reply by Roadrunner on September 1, 2009 at 1:54pm
With all the rain it seems like lots of fields have weed escapes.

We need more heat and no early frost!!!!!!!!!

Roadrunner

Beep Beep
Permalink Reply by Peter Gredig on September 3, 2009 at 7:36am
Aphid #'s are on the rise in soys, but most fields are at R5 or R6 which means it's too late to spray. Never seen corn this tall - the old saying is the later you plant, the taller the corn, and in some fields that appears to be true. Primary cob is set 5.5 feet off the ground!! I think there is a decent crop of soys and corn out there, but we are vulnerable to running out of heat units before physiological maturity. Propane/natural gas sellers will do alright this fall - the corn dryers will be running hard.

I'm hearing that edible bean crops are full of mold/anthracnose. Can anyone verify that?

AgWag
Permalink Reply by Wayne Black on September 4, 2009 at 3:53am
We had our soybeans sprayed for Aphids last month the week of the tornado through Durham. We only had 3/4 inch yet 4 km west one farmer who did not spray had 2 to 3 inches of rain - blasted those bugs! I still had more Aphids than he did a few days later.
First time spraying for aphids. Never seen them so thick - should have taken some photos!
Location - north west Huron County.

Wayne
Permalink Reply by James Ferrier on September 4, 2009 at 9:16am
A fair bit of white mold on our white and black beans. I could see there beeing as much as 40 % crop loss in a few fields but thats not saying alot since the crop looked like it could have doubled last year's earlier on.

Peter Gredig said:
Aphid #'s are on the rise in soys, but most fields are at R5 or R6 which means it's too late to spray. Never seen corn this tall - the old saying is the later you plant, the taller the corn, and in some fields that appears to be true. Primary cob is set 5.5 feet off the ground!! I think there is a decent crop of soys and corn out there, but we are vulnerable to running out of heat units before physiological maturity. Propane/natural gas sellers will do alright this fall - the corn dryers will be running hard.

I'm hearing that edible bean crops are full of mold/anthracnose. Can anyone verify that?

AgWag
Permalink Reply by Joe Dales on September 6, 2009 at 4:09am
Just back from a nice midwest us crop tour through Illinois, Indiana and Michigan....here is a field near the Decatur, IL Farm Progress show...local farmers there say the crop is 3-4 weeks behind but it is looking good.

Permalink Reply by John Beardsley on September 10, 2009 at 11:53am
soys ..a lot of aphid spraying all neccessary????

wb cruiser did a mint job some had to still spray once late for leaf hopper
white mold rampant...should have sprayed 2x????
Permalink Reply by OntAG Admin on September 13, 2009 at 6:18am
The Farms.com Yield Data Centre is ready for Soybean and Corn Test plot Data.

http://www.yielddata.farms.com

We will be entering data once the plots are off.

If you have field level yields, report them here with your location and the varieties.

Thanks,

OntAg Farms.com team

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

Farming Forward in Watford scheduled for Dec. 1

The event will provide farmers with information about farm transition and funding opportunities

Canada and China extend Preliminary Joint Agreement until 2028

The extension means continued tariff-free access for canola meal

Manitoba Dealer AgWest Seeks Lifeline

One of Manitoba's largest equipment dealership networks has been given a temporary lifeline to stay in business while it seeks new financing, pursues a sale or develops a restructuring plan, as the Manitoba Court of King's Bench granted protection from creditors. AgWest Ltd. could be heading toward liquidation as the company was unable to meet payroll obligations in the middle of harvest season, according to a document filed by the company's bank, the Bank of Montreal. AgWest serves farmers at six dealerships in Manitoba at Elie, Morden, Brandon, Neepawa, Russell and Benito, as well as two locations in Saskatchewan at Weyburn and Yorkton. AgWest Ltd. has defaulted on more than $34 million in loans, according to an opening brief in a restructuring proceeding under Canada's Companies' Creditors Arrangement Act. "Since 2026, the AgWest entities have experienced significant financial difficulties, including liquidity challenges and a general inability to meet their obligations as they

Deere Plans 2 Iowa Plant Closures

John Deere announced plans to close two Iowa manufacturing plants in the next few years and move production to other cities, in a news release from the company on Wednesday. Deere said it will be closing its plant in Ottumwa, Iowa, after moving windrower and round-baler production to Des Moines. In addition, the company said it will end manufacturing at its Hagie plant in Clarion, Iowa, after moving STS sprayer production to Louisiana. Windrower production plans to move to Des Moines by the end of 2027 and round balers would follow by the end of 2028, according to Deere, followed by the closure of the plant in Ottumwa. Hagie STS sprayer production is slated to move to Thibodaux, Louisiana, beginning in 2028 with manufacturing ending in Clarion, Iowa, by the end of 2029. John Deere did not provide employment numbers or say how many jobs would be affected, although other media outlets on Wednesday reported the company has about 700 workers at the Ottumwa plant. The number of employee

Diesel Fuel Waivers Bring Engine Compatibility Concerns and Tax Rule Questions

Responding to the surge in diesel fuel prices, federal and state lawmakers introduced temporary measures intended to provide economic relief. These actions raise questions about fuel use requirements and fuel taxation. “Temporary relief measures may help reduce operating costs, but diesel users should not assume that all diesel fuels are interchangeable,” said Allen Schaeffer, executive director of the Engine Technology Forum. “Understanding which fuel is appropriate for a particular engine and complying with tax and regulatory requirements can help avoid equipment damage, unnecessary maintenance costs, warranty concerns, and compliance issues.” Texas and Alaska get ULSD exemptions Ultra-low sulfur diesel (ULSD) is the standard diesel fuel used for both on-highway and off-highway applications throughout the United States, and it is regulated to a maximum sulfur content of 15 parts per million (ppm). On Oct 5, Texas was granted a waiver to supply diesel fuel with up to 500 ppm of sul

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service