Ontario Agriculture

The network for agriculture in Ontario, Canada

Anyone started grain corn? How is the moisture, yields and test weights?

Just wondering how everyone is doing....

Views: 416

Reply to This

Replies to This Discussion

Testing corn here in Burford... Still 30-32% generally. Some has come off in south eastern Brant @ 26-29% No one going full stream yet. Getting anxious....Larry
we took some off at 32% with a decent yeild and have tried some for another guy around 44%. I guess chistmas is coming maybe it will dry down by then.
Brent
Yes have started ,one field done 32% moisture ,200 bu wet 156 bu dry hoping it will dry down some day.
when did this corn get planted and what is your location.
we hope to finish beans this week and than go corn................
Started here Londonish- last week. Planted last week of April. Moisture is in the 30% range and the yield seems to be around 190 bu/ac
Tested 5 different fields in Waterloo and Wellington counties. Moisture ranged from 31 to 35%.
North of Belleville, started today. Some conventional non-BT corn that may not stand up if we get the snow we're supposed to get this weekend so we're going with it. May just keep on going if the forecast doesn't look much better when this field is done. Running about 27%, about 160 bushels wet which on a dry equivalent is about 10% higher than average so better than expected so far.

Forecast - SIGH - http://home.madoccoop.com/index.cfm?show=1&map=CityWeather
My corn planted - May 9th. Moisture - 33.5%. Grade - 4. Starting into a field systematically drained later today or Thursday if it starts to rain again. Yield "looks" decent thus far (no actual yet so i will not speculate).
Most corn delivered to the local elevator is coming in at 28-34% and Grade 4. Very little at Grade 3. Another local elevator is receiving corn at Grade 3 and little at Grade 2 - I can not confirm which one yet.
Pretty discouraging when you deliver a load that nets out at 13.99 ton and yields out at 10.6 ton after moisture shrink & dockage.

rein minnema said:
when did this corn get planted and what is your location.
we hope to finish beans this week and than go corn................
Next question is.............. and where does this #3 and #4 corn fit in to the market????
Casco/ Ethanoland the livestockfeed market???
Final numbers:
half of the field - 146 bu/ac (not drained).
Other half - 156 bu/ac (systematically drained at 40')
same hybrid and previous crops. 1/3 went Grade 3; 2/3 - Grade 4.

Wayne Black said:
My corn planted - May 9th. Moisture - 33.5%. Grade - 4. Starting into a field systematically drained later today or Thursday if it starts to rain again. Yield "looks" decent thus far (no actual yet so i will not speculate).
Most corn delivered to the local elevator is coming in at 28-34% and Grade 4. Very little at Grade 3. Another local elevator is receiving corn at Grade 3 and little at Grade 2 - I can not confirm which one yet.
Pretty discouraging when you deliver a load that nets out at 13.99 ton and yields out at 10.6 ton after moisture shrink & dockage.

rein minnema said:
when did this corn get planted and what is your location.
we hope to finish beans this week and than go corn................
I am travelling in western New York state this weekend...Buffalo to Rochester area

Looks like half of the corn has been harvested.
Still the odd soybean field to finish combining.
Does not look like they were able to plant much winter wheat either.

Joe Dales
Hoping to finish our last 80 acres of beans in the next 2-3 days. Corn yesterday was down around 22%, mostly grade 2, still have a couple of fields around 35% but we need some HM anyway. Still seems to be running well above average for yield.

Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

‘It’s another blow’: Farmers deal with surging fertilizer prices ahead of seeding

Fertilizer is an essential part of Kevin Peters’ farm in southwestern Manitoba. But since Israel and the U.S. attacked Iran, the average price of urea fertilizer, which is widely used around the world, has skyrocketed, surging around 30 per cent over the last week. Peters says the interruption in supply didn’t come as a huge surprise to him. “We deal with geopolitical issues all the time with markets, be it pork, be it grain, and now fertilizer,” he said. “There’s always some disruption seeming to happen somewhere in the world that is changing our daily prices.” Peters says he pre-purchased his fertilizer for this farming season back in the fall but is concerned about prices later this year when he has to buy fertilizer again. “We’ll see what the market looks like in eight months,” he said. Like Peters, Andrew James also pre-bought his fertilizer in the fall for his farm in Anola, Man., and he says he is happy he did. “My fertilizer bill for that (at the time) was around $350,00

From a Piece of Wire to Contaminated Feed: Preventing Foreign Material Hazards in Beef Cattle Operations

Foreign material and toxin consumption by beef cattle can lead to significant health problems, reduced performance and economic losses. Canadian cattle producers take great pride and care in how they manage their farms and ranches, from providing proper nutrition to stewarding their land and ensuring excellent animal care. Yet even with the best intentions, foreign materials and toxins can quietly find their way into feed, water or pastures. Understanding where they come from and how to prevent exposure is a key part of protecting your herd. Foreign materials and toxins often slip in through everyday farm activities such as repairing fences, running equipment, feeding hay or dealing with weather-stressed crops. A small piece of wire, leftover net wrap or contaminated feed source might not seem like much, but if consumed by cattle, it can trigger health issues, lost performance or even death. Understanding Hardware Disease When cattle consume sharp metal objects like nails or pieces

Farmers Balance Costs and Technology Investments - Tractor Sales Down

Tractor sales fell across most categories in February, but strong combine demand highlights farmers’ continued investment in productivity boosting technology.

Crude Oil and Natural Gas Outlook - What Farmers Need to Know in 2026–2027

Brent crude prices surge as Middle East conflict disrupts supply. See the 2026–2027 outlook for oil, natural gas, and electricity—and what it means for U.S. agriculture

Principal field crop areas, 2026

Canadian farmers expect to plant more canola, barley, soybeans and corn for grain in 2026, while they anticipate area seeded to wheat, oats, lentils and dry peas to decrease compared with the previous year. Wheat At the national level, farmers anticipate planting 26.7 million acres of wheat in 2026, down 1.1% from the previous year. If this anticipation is realized, national wheat area would remain well above the five-year average, despite a decrease from 2025, which would likely be attributable to continued strong global demand. Producers expect spring wheat area to edge down 0.1% to 18.8 million acres in 2026. They anticipate durum wheat area to decrease 2.4% to 6.4 million acres, while they expect winter wheat area to fall 6.7% to 1.6 million acres. Farmers in Saskatchewan anticipate planting 13.9 million acres of wheat in 2026, down 1.0% from the previous year. Producers expect spring wheat area to fall 0.6% to 8.7 million acres, while they anticipate durum wheat area to remain

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service