Ontario Agriculture

The network for agriculture in Ontario, Canada

Anyone started grain corn? How is the moisture, yields and test weights?

Just wondering how everyone is doing....

Views: 362

▶ Reply to This

Replies to This Discussion

Permalink Reply by Larry Davis on October 31, 2009 at 9:05am
Testing corn here in Burford... Still 30-32% generally. Some has come off in south eastern Brant @ 26-29% No one going full stream yet. Getting anxious....Larry
Permalink Reply by Brent Royce on November 1, 2009 at 12:50am
we took some off at 32% with a decent yeild and have tried some for another guy around 44%. I guess chistmas is coming maybe it will dry down by then.
Brent
Permalink Reply by murray hutton on November 1, 2009 at 10:21am
Yes have started ,one field done 32% moisture ,200 bu wet 156 bu dry hoping it will dry down some day.
Permalink Reply by rein minnema on November 1, 2009 at 1:11pm
when did this corn get planted and what is your location.
we hope to finish beans this week and than go corn................
Permalink Reply by connieb on November 2, 2009 at 6:23am
Started here Londonish- last week. Planted last week of April. Moisture is in the 30% range and the yield seems to be around 190 bu/ac
Permalink Reply by Mike Cowbrough on November 2, 2009 at 6:48am
Tested 5 different fields in Waterloo and Wellington counties. Moisture ranged from 31 to 35%.
Permalink Reply by Dale Ketcheson on November 2, 2009 at 1:18pm
North of Belleville, started today. Some conventional non-BT corn that may not stand up if we get the snow we're supposed to get this weekend so we're going with it. May just keep on going if the forecast doesn't look much better when this field is done. Running about 27%, about 160 bushels wet which on a dry equivalent is about 10% higher than average so better than expected so far.

Forecast - SIGH - http://home.madoccoop.com/index.cfm?show=1&map=CityWeather
Permalink Reply by Wayne Black on November 3, 2009 at 7:34am
My corn planted - May 9th. Moisture - 33.5%. Grade - 4. Starting into a field systematically drained later today or Thursday if it starts to rain again. Yield "looks" decent thus far (no actual yet so i will not speculate).
Most corn delivered to the local elevator is coming in at 28-34% and Grade 4. Very little at Grade 3. Another local elevator is receiving corn at Grade 3 and little at Grade 2 - I can not confirm which one yet.
Pretty discouraging when you deliver a load that nets out at 13.99 ton and yields out at 10.6 ton after moisture shrink & dockage.

rein minnema said:
when did this corn get planted and what is your location.
we hope to finish beans this week and than go corn................
Permalink Reply by rein minnema on November 3, 2009 at 12:21pm
Next question is.............. and where does this #3 and #4 corn fit in to the market????
Casco/ Ethanoland the livestockfeed market???
Permalink Reply by Wayne Black on November 7, 2009 at 2:18pm
Final numbers:
half of the field - 146 bu/ac (not drained).
Other half - 156 bu/ac (systematically drained at 40')
same hybrid and previous crops. 1/3 went Grade 3; 2/3 - Grade 4.

Wayne Black said:
My corn planted - May 9th. Moisture - 33.5%. Grade - 4. Starting into a field systematically drained later today or Thursday if it starts to rain again. Yield "looks" decent thus far (no actual yet so i will not speculate).
Most corn delivered to the local elevator is coming in at 28-34% and Grade 4. Very little at Grade 3. Another local elevator is receiving corn at Grade 3 and little at Grade 2 - I can not confirm which one yet.
Pretty discouraging when you deliver a load that nets out at 13.99 ton and yields out at 10.6 ton after moisture shrink & dockage.

rein minnema said:
when did this corn get planted and what is your location.
we hope to finish beans this week and than go corn................
Permalink Reply by Joe Dales on November 8, 2009 at 4:31am
I am travelling in western New York state this weekend...Buffalo to Rochester area

Looks like half of the corn has been harvested.
Still the odd soybean field to finish combining.
Does not look like they were able to plant much winter wheat either.

Joe Dales
Permalink Reply by Dale Ketcheson on November 8, 2009 at 3:25pm
Hoping to finish our last 80 acres of beans in the next 2-3 days. Corn yesterday was down around 22%, mostly grade 2, still have a couple of fields around 35% but we need some HM anyway. Still seems to be running well above average for yield.

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

Animal Health Canada Shares 2030 Goals for Livestock

Animal Health Canada (AHC) has announced five goals to achieve by 2030, designed to safeguard farmed animal health and welfare.

Treat Her Like a Cow: Building Fertile, Profitable Heifers

“The more you treat her like a cow, the better cow she will be.” That was one of the standout messages from the Beef Cattle Research Council’s webinar, Raising Heifers for Reproductive Success. Backed by research and on-ranch results, Dr. Elizabeth Homerosky with Veterinary Agri-Health Services and Stephen Hughes of Chinook Ranch in southern Alberta shared practical strategies to develop efficient replacement heifers that are built for longevity and profitability. The discussion focused on the economics of raising heifers, research-backed development systems, reproductive management and how producers can apply extensive grazing systems to identify the most fertile and efficient females for their herds. The Cow Value Curve Dr. Homerosky opened with the concept of the cow value curve, which illustrates how feed costs and depreciation are the top two effects on profitability. An open heifer that leaves the herd before paying for herself contributes heavily to depreciation. Strategies s

Fences, Filters and Eavestroughs: Innovative Water Initiatives to Improve Herd Health

Brian Windover and his son, Scott, own and operate Bayview Farms in Napanee, Ontario. Their operation includes a 90-head commercial Gelbvieh and Gelbvieh x Charolais cattle herd that is Verified Beef Production Plus (VBP+) Certified.   The farm includes 250 acres of pastureland with both treed and open fence lines. Two of the pastures border Hay Bay, a bay of Lake Ontario, and are fenced off to deny cattle access to the bay.  Maintaining good water quality has always been a top priority for Bayview Farms, leading them to implement several changes to reduce manure contamination and ensure an abundant supply of drinking water for their cattle.  A Stock Water Quality Issue The main source of drinking water for the cattle comes from a spring-fed pond which feeds a well. Water is pumped from the well into troughs in the barn. Cattle are kept away from the pond with a dirt berm and concrete barriers. Despite this, Brian and Scott still noticed that the water was discoloured and smelly, p

Kyle Larkin appointed president and CEO of Canadian Meat Council

Kyle Larkin begins as president and CEO of the Canadian Meat Council in January

What steps does a Grower need to take to Deliver Clean Grain?

Growers are encouraged to deliver clean grain and complete correct declarations to protect grain quality, meet market expectations, and maintain access to important export markets.

© 2025   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service