Ontario Agriculture

The network for agriculture in Ontario, Canada

Biogas is more than energy

The Ontario biogas industry association (www.apao.ca) would like to expand knowledge of biogas - what it is and its benefits - inside and out of the agriculture community.

 

We know that biogas produces power 24/7, reduces actual greenhouse gas emissions, diverts waste from landfill, eliminates odours and pathogens, creates a better than commercial-grade fertilizer (yields +10%) and usable heat, and increases revenues for farmers – but, we also know most people have no idea what you’re talking about when you say biogas.

 

What do you think? Would you support plans to build as many as 500 on-farm biogas plants around the province? This level of development could create over $4 billion in economic activity and reduce greenhouse gas emissions by 5 million tons annually.

Views: 1068

▶ Reply to This

Replies to This Discussion

Permalink Reply by John Schwartzentruber on January 17, 2011 at 6:36am

What are the potential feedstocks that would fuel these plants? You already made mention of landfill waste - an excellent and steady source - but beyond that?

 

What about undesirable residues in the fertilizer, IE - heavy metals?

 

It looks like a better alternative than solar and wind power in that it works around the clock and should be a more affordable technology. I think a lot of solar/wind enthusiasts (both consumers and producers) are going to be in for a rude awakening not too far down the road.

Permalink Reply by Bristow on January 17, 2011 at 6:59am

Heavy metals are taken out in leaking process in tanks or ponds, same as sewage.

Permalink Reply by John Schwartzentruber on January 17, 2011 at 7:07am
Another question - why are biogas-produced energy rates so much lower than solar or wind generated?
Permalink Reply by Daniel Bida on January 17, 2011 at 7:13am

Essentially any organic material is suitable provided the mix inside the digester has the right carbon/nitrogen balance. That being said, some materials are definitely better than others.


Manure - Dairy, Chicken and Hog

Food waste - from industrial, commercial and institutional sectors is easier to handle than residential curbside organics, due to higher contamination levels (plastic bags, cutlery, packaging, etc.). When fruits and veggies, grease trap waste and other fats, oils and greases (FOG) are used there is no issues with heavy metals in the fertilizer.  Abattoir waste is also an excellent feedstock source, however it does require additional treatment to remove heavy metals.

Energy crops - Grass and Corn silage make excellent feedstock sources as they have high energy values and carbon content (needed for Chicken and Hog manure based projects).  However, they are valuable cash crops and may be more valuable as crops, not energy. Studies have shown that a crop like Jerusalem artichoke is an ideal feedstock - it's energy rich, can grow in sub-prime ag land and doesn't require fertilizers or annual seeding.

Grass clippings and yard waste - suitable but seasonal.

Municipal biosolids - plentiful, but a lower energy value and requires additional treatment to remove heavy metals. Many global municipalities already use anaerobic digestion to treat biosolids, but the gas is just flared.

check out the OMAFRA site for more info http://www.omafra.gov.on.ca/english/engineer/ge_bib/biogas.htm

Biogas is a much better alternative than wind and solar, however, the total generating capacity potentially available from biogas-fired generators is somewhere between 300 - 1000 MW.  Ontario requires much more energy than this on a regular basis, so wind/solar/hydro is a necessary part of the energy mix as well. As an investment, biogas provides much greater returns to society per kW than wind and solar.


John Schwartzentruber said:

What are the potential feedstocks that would fuel these plants? You already made mention of landfill waste - an excellent and steady source - but beyond that?

 

What about undesirable residues in the fertilizer, IE - heavy metals?

 

It looks like a better alternative than solar and wind power in that it works around the clock and should be a more affordable technology. I think a lot of solar/wind enthusiasts (both consumers and producers) are going to be in for a rude awakening not too far down the road.

Permalink Reply by Daniel Bida on January 17, 2011 at 7:18am

It's hard to say the exact reason, but it is meant to be based on the cost of production and allowing for a return on investment of 11%.  That being said, knowledge and experience with biogas was very low at the time the FIT was released in comparison to wind and solar, so there was an element of arbitrariness to it.  The industry is hopeful that when the FIT program is reviewed in the fall of 2011, rates for biogas will be adjusted upwards and not cut like wind/solar are likely to be.

 

It should be noted that at current rates, not all projects are economical - tipping fees from organic waste producers are one of the main revenue drivers.


John Schwartzentruber said:

Another question - why are biogas-produced energy rates so much lower than solar or wind generated?
Permalink Reply by OntAG Admin on January 17, 2011 at 11:29am
BIOGAS COURSE PROMISES PRACTICAL KNOWLEDGE FOR PLANT OPERATORS 01/17/11
From a release

Green energy was given the green light when the Ontario Green Energy Act was passed in 2009. Since then, solar and wind projects have been springing up across the province. Anaerobic digesters to produce biogas have also gained popularity, and an upcoming course on biogas production will be of value to people involved in this new technology.

“Operating Your Biogas Facility” is a three-day (February 8-10, 2011) course designed for owners and operators of biogas facilities, as well as engineers, consultants and others who want to learn more about biogas operations. It is being held at the Best Western Cambridge Hotel, 730 Hespeler Road, Cambridge, ON

Knowledgeable speakers will give participants practical information and teach the safe and efficient operation of a biogas plant. The course includes an overview of biogas production and use, a tour of two biogas plants, an update on regulations, and information on safety, inspection and troubleshooting.

The registration fee for the program is $400 + HST and includes the full program, a reference manual, and refreshments and lunch each day.

Earl Jensen, a professional engineer at Alberta Innovates - Technology Futures
in Vegreville Alberta with a diverse background in the biogas field, is one of the featured workshop leaders. He has worked extensively on anaerobic digestion equipment with a variety of input materials, and his knowledge extends from the laboratory to full-scale industrial biogas plant design and operation. “It is the intent of this course to provide solid fundamental information that will help biogas plant operators understand the intertwined processes occurring within their biogas plant. This information should prove to be a useful tool for improving plant performance, problem solving and advancing knowledge on the subject,” he says.

The second featured speaker is Birgit Pfeifer. She is an Environmental Engineer from Germany who has been involved in screening and monitoring of biogas plants in Europe for a number of years. She works in cooperation with operators and focuses on variance analysis, evaluation, engineering settings, biological process, measurements and start-up of new biogas plants. She has also spoken at several biogas training sessions in Ontario over the past several years.
Permalink Reply by Bristow on January 24, 2011 at 4:51pm
Or you can pay me your $400 less HST, look up all the information on Youtube. Or you can pay for the above course wait 10 years to get approvel to build your plant like the guy posted by the above about three months ago.
Permalink Reply by Roadrunner on January 31, 2011 at 11:21am

Are there any Ontario based biogas plants operational - connected to the grid and making a return on investment?

I would think you would need a big operation with lots of manure to have the scale required to make it worth the effort required.

 

Permalink Reply by Bristow on January 31, 2011 at 11:59am


It would be the same as solar return, back in the grid, but you get more for your self than solar, eg gas as fuel, fertlizer. Ideal for Animal farm. Not so for grain or crop.

<iframe title="YouTube video player" class="youtube-player" type="text/html" width="475" height="385" src="http://www.youtube.com/embed/BiHDQClpZfI?rel=0" frameborder="0" allowFullScreen></iframe>
Roadrunner said:

Are there any Ontario based biogas plants operational - connected to the grid and making a return on investment?

I would think you would need a big operation with lots of manure to have the scale required to make it worth the effort required.

 

Permalink Reply by Ross Blaine on March 18, 2011 at 7:58am
Yes we have one going in Cambridge go we www.grobergreen.com and have a look.  we also do tours so if anyone is interested our AD suite is setup for them

Roadrunner said:

Are there any Ontario based biogas plants operational - connected to the grid and making a return on investment?

I would think you would need a big operation with lots of manure to have the scale required to make it worth the effort required.

 

Permalink Reply by Kevin Stewart on April 5, 2011 at 1:48am

Here is a little video interview with Jake DeBruyn from OMAFRA and

 

 

 

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

I’m switching my wheat variety; do I need to change my seeding rate?

The short answer is yes; you will most likely need to change your seeding rate, but this is not just because you are planting a different wheat variety. Rather, seeding rates should be adjusted annually to reflect seed source characteristics (germination, thousand kernel weight [TKW]) and the environment the seed is being planted into, to ensure you can achieve your target plant population.   Let’s dig into why this is. For spring wheat, provincial target plant population recommendations are between 23-28 pl/ft2, with many producers targeting the upper end of this recommendation. Achieving your target plant stands sets your crops up for success, as crop uniformity is improved, weed pressure is combatted and resources are optimized.  Seeding rates should be calculated to achieve your target plant stand, which means accounting for germination percentage, expected mortality and, importantly, your TKW. TKW changes year-to-year and from variety to variety. Let’s consider an example to ill

How much 10-34-0 can be applied with my corn seed?

Oddly, I have had this conversation more this winter/spring than ever before. On paper, there is a finite answer. Anecdotally, there are a few different options and it is all dependent on soil type and soil conditions, moisture, etc. First of all, side-banding any type of fertilizer is much safer than placing it with the seed. Some fertilizers are safe in certain quantities with the seed, but very few. Side-banding is much safer and provides quick access to the roots. Midrow banding is the safest method, but roots take that much longer to access the fertilizer row, which negates the “starter” effect. The other factor that indicates the level of safety is soil moisture; the drier the soil, the more risky it is to place any fertilizer with or near the seed. I’m guilty of thinking that fertilizer toxicity to the seed is mainly due to the nitrogen content and a result of ammonia burn. Salt injury is actually more common and affects germination and early season growth, so applying fertili

AGT Food and Ingredients Inc. Announces Date for Q1 2026 Results and Conference Call

AGT Food and Ingredients Inc. (TSX: AGTF) ("AGT" or the "Company") announces the release of its Q1 2026 results on May 12, 2026 after market close and has scheduled a conference call at 8:30 a.m. Eastern time on May 13, 2026. To join the conference, please dial 1-833-821-0163 (toll free from Canada & the U.S.) or +1-647-846-7232 (from outside Canada & the U.S.). An audio replay of the conference call will be available on AGT's website after the call by visiting www.agtfoods.com. The financial statements and notes thereto for the three months ended March 31, 2026, as well as the related management's discussion and analysis will be filed on SEDAR+ at www.sedarplus.com and will also be available on the AGT website at www.agtfoods.com prior to the conference call. About AGT AGT is a globally diversified food company that produces high-quality, nutritious products for everyday consumption. Our products reach consumers in 127 countries, and our global footprint consists of 39 state-of-the

Rising Waters on the Canadian Prairies and Beyond

With flooding affecting several Canadian provinces, farmers are being urged to act quickly to protect crops, animals, infrastructure, and long-term soil health.

Is Your Bull Ready? A Year-Round Approach to Bull Management

Every cow-calf producer has either lived it or knows someone who has. Breeding season wraps up and everything looks fine, until fall preg-checks tell a different story: open cows, late calvers and a breeding window that slipped wider than planned. While cow nutrition, body condition and management are frequently evaluated, one critical factor is often underestimated—the bull. Most frustrating is that there are often no obvious warning signs during breeding. The bull was turned out, was covering cows and looked the part. On the surface, everything appeared normal. That’s exactly why a bull breeding soundness evaluation (BBSE) matters more than many producers realize. It is one of the few opportunities to take some guesswork out of bull performance. On a cow-calf operation, bulls get a lot of attention for a couple of months out of the year and very little once breeding season wraps up. The reality is that a bull’s value doesn’t start on turnout day, and it definitely doesn’t end when

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service