Ontario Agriculture

The network for agriculture in Ontario, Canada

How much field work is going on?

I saw some light ground around Brantford that was worked in the past week or so...

 

Has anyone else started?

 

Too wet for most everyone else I suspect.

 

 

Views: 224

▶ Reply to This

Replies to This Discussion

Permalink Reply by Dale Ketcheson on April 13, 2010 at 2:50pm
Around here (north of Belleville) almost any ground can be worked, most people have their barley all in, the only thing holding anybody back is that it's still too early to plant corn. We've already worked land that we usually can't touch until late May.
Permalink Reply by Joe Dales on April 16, 2010 at 6:14am
I heard there was some corn planted down in Kent county the past few days....anyone else start?

It sounds like the Midwest US is going to be planting alot of corn this week if the ground is fit.

Joe Dales
Permalink Reply by OntAG Admin on April 16, 2010 at 11:07am
Some corn planted in Ontario April 3....


Permalink Reply by OntAG Admin on April 21, 2010 at 1:41am
Post April 20th on OntAg Activity section:"corn planting started full swing in brussels ON, no time for twitter, ontag or facebook"

Good luck with the planting - it's early, but great conditions.
Permalink Reply by littlelamb on April 21, 2010 at 2:24am
Corn planters going like crazy here in the Stratford area. We are hoping to get it in on Friday just before the rain.
Permalink Reply by Joe Dales on April 24, 2010 at 3:51am
It was an impressive show of farming this week as I drove through IL, IN, MO, MI and OH....every working tractor, planter, sprayer and farm truck seemed to be moving....new equipment, old equipment, large, smaller...we know how to put a corn crop in the ground in this tight weather window.....

The corn crop is being planted in the Midwest USA in excellent conditions and the two weeks of dry and mostly sunny weather has worked out well for most producers.

In Missouri, I would estimate that most of the corn has been planted and they got a nice day long soaker of rain on Wednesday.....

Rain may slow down the planting in IL and IN but it looked like a good start has been made....

OH and Michigan are started but are going to need some additional dry days to get the corn in.

I did not see any emerged corn on my travels and the weather was nice 60 - 70F but not hot this week.

There was alot of field work going on in Essex, Kent and Middlesex here at home and with the dust, it looks like it is a little dry on top? I did not stop to check because I was a little tired from my tour...know how everyone else is feeling after working 20 hours a day for the past couple of weeks....

Good luck everyone and be safe.

Joe
Permalink Reply by eric phillips on April 26, 2010 at 3:35pm
on p.e.i some potato planting has started weather here is cool for last couple weeks the middle of may is good time in this aera
Permalink Reply by Sandra Dales on May 5, 2010 at 7:34am
Farmers getting early jump on planting - London Free Press
May 4, 2010 14:23
Farmers are relishing this warm dry weather as it allows them to get their corn and bean crops in the ground early, to await the spring rains which they say they'll need.


▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

I’m switching my wheat variety; do I need to change my seeding rate?

The short answer is yes; you will most likely need to change your seeding rate, but this is not just because you are planting a different wheat variety. Rather, seeding rates should be adjusted annually to reflect seed source characteristics (germination, thousand kernel weight [TKW]) and the environment the seed is being planted into, to ensure you can achieve your target plant population.   Let’s dig into why this is. For spring wheat, provincial target plant population recommendations are between 23-28 pl/ft2, with many producers targeting the upper end of this recommendation. Achieving your target plant stands sets your crops up for success, as crop uniformity is improved, weed pressure is combatted and resources are optimized.  Seeding rates should be calculated to achieve your target plant stand, which means accounting for germination percentage, expected mortality and, importantly, your TKW. TKW changes year-to-year and from variety to variety. Let’s consider an example to ill

How much 10-34-0 can be applied with my corn seed?

Oddly, I have had this conversation more this winter/spring than ever before. On paper, there is a finite answer. Anecdotally, there are a few different options and it is all dependent on soil type and soil conditions, moisture, etc. First of all, side-banding any type of fertilizer is much safer than placing it with the seed. Some fertilizers are safe in certain quantities with the seed, but very few. Side-banding is much safer and provides quick access to the roots. Midrow banding is the safest method, but roots take that much longer to access the fertilizer row, which negates the “starter” effect. The other factor that indicates the level of safety is soil moisture; the drier the soil, the more risky it is to place any fertilizer with or near the seed. I’m guilty of thinking that fertilizer toxicity to the seed is mainly due to the nitrogen content and a result of ammonia burn. Salt injury is actually more common and affects germination and early season growth, so applying fertili

AGT Food and Ingredients Inc. Announces Date for Q1 2026 Results and Conference Call

AGT Food and Ingredients Inc. (TSX: AGTF) ("AGT" or the "Company") announces the release of its Q1 2026 results on May 12, 2026 after market close and has scheduled a conference call at 8:30 a.m. Eastern time on May 13, 2026. To join the conference, please dial 1-833-821-0163 (toll free from Canada & the U.S.) or +1-647-846-7232 (from outside Canada & the U.S.). An audio replay of the conference call will be available on AGT's website after the call by visiting www.agtfoods.com. The financial statements and notes thereto for the three months ended March 31, 2026, as well as the related management's discussion and analysis will be filed on SEDAR+ at www.sedarplus.com and will also be available on the AGT website at www.agtfoods.com prior to the conference call. About AGT AGT is a globally diversified food company that produces high-quality, nutritious products for everyday consumption. Our products reach consumers in 127 countries, and our global footprint consists of 39 state-of-the

Rising Waters on the Canadian Prairies and Beyond

With flooding affecting several Canadian provinces, farmers are being urged to act quickly to protect crops, animals, infrastructure, and long-term soil health.

Is Your Bull Ready? A Year-Round Approach to Bull Management

Every cow-calf producer has either lived it or knows someone who has. Breeding season wraps up and everything looks fine, until fall preg-checks tell a different story: open cows, late calvers and a breeding window that slipped wider than planned. While cow nutrition, body condition and management are frequently evaluated, one critical factor is often underestimated—the bull. Most frustrating is that there are often no obvious warning signs during breeding. The bull was turned out, was covering cows and looked the part. On the surface, everything appeared normal. That’s exactly why a bull breeding soundness evaluation (BBSE) matters more than many producers realize. It is one of the few opportunities to take some guesswork out of bull performance. On a cow-calf operation, bulls get a lot of attention for a couple of months out of the year and very little once breeding season wraps up. The reality is that a bull’s value doesn’t start on turnout day, and it definitely doesn’t end when

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service