Ontario Agriculture

The network for agriculture in Ontario, Canada

Regulations Killing The Small Meat Abattoirs and Local Meat Processors. Does It Matter?

I saw the following article in the Markdale Standard and thought it would be of interest....

 

Regulations blamed for loss of abattoirs

Posted By Mary Golem

Holding up a thick binder of rules and regulations, the owner of a small local butcher shop said over-regulation and "confusion over how those regulations are being interpreted" are making his life difficult.

 

Kelven Arnold of Sullivan's Butcher Shop in Wiarton told a crowd at a meeting in Elmwood Wednesday night that some of the provincial meat industry inspection regulations are "physically impossible" for him and other small butcher shop and abattoir owners, "and extremely costly." Arnold says he's spent more than $75,000 in the last three years trying to comply.

 

"But there's no way you can question the rules, or not do what they want," he added.

 

"They'll just shut you down."

 

Stricter regulations are destroying small abattoirs across Ontario, threatening also the farmers who use them and reducing opportunities for people to buy local food, said Barb Klages, a member of the Malcolm Women's Institute, who spearheaded the organization of the information meeting.

 

Large and small plants are expected to meet the same compliance standards "and for many small operations, that's just simply impossible," says Louis Roesch, one of four key speakers at the meeting.

 

Fifteen years ago, Ontario had more than 900 businesses to process meat and poultry. Today, there are about 130.

 

Freeman Boyd, co-ordinator of the Buy Local Food project, said a year ago Grey-Bruce had nine provincially inspected plants and one federally inspected operation.

 

"We lost one last year, one closed this year and another is for sale. Two more might close and two are in immediate danger of closing . . . we may be down to five or less slaughter plants in the area in the not too distant future. That should be of immediate concern, not only to producers, but consumers as well."

 

Read the rest of the Markdale Standard article here.

 

http://www.markdalestandard.com/ArticleDisplay.aspx?e=2617944

 

Views: 143

▶ Reply to This

Replies to This Discussion

Permalink Reply by Bristow on June 19, 2010 at 2:42pm
Had a simlar article on this forum a few months ago about a Cochrane processer, in North Ontario. Wear was the support for him from the above producessors. These regulations have one purpose take overs, unless a strong message is sent with the support of unions and all small producessors through out the provience they will take you down one by one. region by region.

Maybe we should have a new preimier's award for invonation. The award could be called can his government no piss off the farmers and prodcessors and no implement government invonation for the rest of his term. And maybe, just maybe a farmer could make some money to pay taxes.
Permalink Reply by Roadrunner on June 20, 2010 at 5:46am
I was shocked to see 900 operation down to 130 in five years???? But not surprised with I think about it.

We need to keep these local markets and local rural jobs....

My question is "Is there no money in processing or is it the regulatory barriers?"

If government policy is driving these processing operations out of business we need to figure out how to stop and reverse this trend.

Fewer marketing choices is not good for producers...
Permalink Reply by Bristow on June 20, 2010 at 11:02am
If Mr McCunty, sorry is it, McGuinty is to true form like our labour preimers in Australia, he will find the burden of his office has taken a heavy total on his family life, and must retire. Normal to a cushy quongo job, specially made for him by all those who he helped feather their nest. Leaving some fall guy to take the blame, normally a female. It totally amazes me how these flimflam people are elected, within their politial parties and why with the experience some of the older members who hold the reins don't, see the wolf under sheep's clothing. Thats why you need a Senate, to review these laws and policies. Their impact on the communities, businesses and not give the green light for this sort of result to happen, when any policial party gets into power.
Permalink Reply by Joe Dales on June 29, 2010 at 8:11am
Agriculture Minister Carol Mitchell says her department is looking for ways to help small abattoirs.
Mitchell says she's well aware of the struggles some of those operators are facing.

(Carol Mitchell On Abattoirs) Click to listen to an audio interview.
Many of those small abattoir owners are blaming new inspection standards for their problems.
A number of them have had to shut down because they can't make a living the way things are right now.
Permalink Reply by John Schwartzentruber on June 30, 2010 at 6:08am
Would that mean something like "I'm from the government and I'm here to help you . . ."?

Joe Dales said:
Agriculture Minister Carol Mitchell says her department is looking for ways to help small abattoirs.
Mitchell says she's well aware of the struggles some of those operators are facing.

(Carol Mitchell On Abattoirs) Click to listen to an audio interview.
Many of those small abattoir owners are blaming new inspection standards for their problems.
A number of them have had to shut down because they can't make a living the way things are right now.

▶ Reply to Discussion

RSS

Agriculture Headlines from Farms.com Canada East News - click on title for full story

The rise and fall of Minneapolis-Moline

Minneapolis-Moline dates back to the Candee & Swan Plow Company of Moline, Illinois, founded in 1865. It became Moline Plow Company (later, Moline Implement Company), a major Midwestern producer of tilling equipment: plows, harrows and other tools for sowing grain crops.  The Minneapolis Threshing Company began in Fond du Lac, Wisconsin, in 1874, and settled in Hopkins, Minnesota, in 1887. It concentrated on equipment for the last stage of small grain production: threshing.  Minneapolis Steel and Machinery Company, founded in 1902, began by making heavy construction equipment and steam engines, then moved into vehicles, including tractors (the Twin City line, 1912) and buses. Its chief executive, Warren C. MacFarlane, engineered the 1929 merger of the three companies and became president. The merger produced a company that served farming tasks year-round: tilling, planting, weeding, harvesting and processing. Such integration was needed to compete with industrial giants like John De

Archery range, workshop and beer: Massive Princess Auto flagship does more than tools and equipment

Hundreds of people crowded together and cheered Tuesday morning for the grand opening of Princess Auto's massive new flagship in Winnipeg — a store the company says marks "a significant evolution" in the shopping experience. The celebration began with a chain cutting ceremony before the shoppers — some spent all night waiting — were invited through the doors at 7 a.m. The 105,000-square-foot store at 500 Panet Rd. is the biggest of Princess Auto's 59 stores across the country. It's been under construction for 18 months and based on Tuesday's turnout, a lot of people have been anxious for it. Chris Pellerin showed up at 6:40 a.m. and estimated there were 500 people in front of him. "I'm [at Princess Auto] almost every week, resupplying tools for our shop. So, you know, this is kind of a pivotal moment in time for me and for the company. It's great to see it." The first person in line arrived at 8 p.m. Monday night, said senior vice-president Heather Turnbull-Smith, who pulled in at

Burrows Enterprises Celebrates Production of 5,000th Roto Grind Tub Grinder

Burrows Enterprises, LLC is proud to announce a major milestone in company history — the production of its 5,000th Roto Grind Tub Grinder, completed during the first week of May 2026. The family-owned company, manufacturer and marketer of the Roto Grind Tub Grinder and Grain Grinder product lines, is celebrating nearly five decades of innovation and growth in the agricultural equipment industry. Founded in 1977 by Harvey Burrows, Burrows Enterprises began as a small family operation focused on designing and manufacturing agricultural equipment. Harvey Burrows developed and patented the unique Roto Grind Tub Grinder design that helped establish the company’s reputation throughout the industry. Royal Burrows began working alongside his father when the company was founded. In the early years, Royal and his brother handled much of the welding, assembly, and painting themselves as the business worked to establish its footing in the market. Royal also traveled extensively across North Ame

Industry Shares Comments on CNH’s Color-Mixing of its Dealer Network

The recent move by CNH to further align the Case IH and New Holland organizations—often referred to as the "purpling" of the brands—has generated significant discussion throughout the dealer network. While many details remain unclear, NAEDA sees both opportunities and challenges associated with this strategy. On May 11, 2026, Ag Equipment Intelligence learned of CNH’s layoffs and a reorganization for a combined management authority over BOTH the New Holland and Case IH dealer networks. A brief mention of the CNH leadership reorganization around a consolidating of the brand oversight was reported in Ag Equipment Intelligence, in its May 15, 2026 newsletter.  A week later, several at this week's Ag Equipment Intelligence Executive Summit described it as a “purpling” of the organization known for its New Holland (blue) and Case IH (red) colors. Another update was provided in the May 25, 2026 episode of Ag Equipment Intelligence’s On The Record broadcast.  It was big news for a company

Canola Storage Tips Keep Crops Market Ready

Safe canola storage prevents contamination, protects quality, and ensures export acceptance by avoiding malathion use and following proper grain handling practices.

© 2026   Created by Darren Marsland.   Powered by

Badges  |  Report an Issue  |  Terms of Service